Code59 - Call for bins

turbodig

turbodig

Active member
For you guys that are running code59, there's currently an open call for bins on code59.org.
This is a request to post up your current running bin.

http://www.code59.org/forum/topic.asp?TOPIC_ID=948

We're going to be updating the site soon, and we want a good collection of bins out there when we go live.

Part of the License agreement when you downloaded was that you share your work... so share the love!
 
JSM

JSM

Active member
Re: Code59 - Call for bins

Open up a reply to topic window, attach file option should then exist.

My TTv8 bin is posted for everybody to look at also.

This is for sure the most sharing of bins I have EVER seen for the syty world. Anybody not sure if they can handle tuning on their own should just try it.
 
Osmosis

Osmosis

New member
Re: Code59 - Call for bins

Dig,

I have only changed my bin twice by pulling some timing out of the chip after I added some increased boost psi up to 18.5psi.

Once I get time to mess with my tune, I will definatley post my bin or bins. I plan on runing two bins, one for 18psi, and the second with 21psi.

I'm thankful that you guys share your work around here! It's nice that we do share our work as we can all work together so we can tune or trucks to perfection! Some other sites are not so cooperative. :myclone:
 
P

PPI Typhoon

DIY Madman
Re: Code59 - Call for bins

TwinTurboV8Ty said:
Open up a reply to topic window, attach file option should then exist.

My TTv8 bin is posted for everybody to look at also.

This is for sure the most sharing of bins I have EVER seen for the syty world. Anybody not sure if they can handle tuning on their own should just try it.
Click to expand...

Yeah I remember when you used to get attacked for even trying to figure out 3-bar tunes. :roll:
 
turbodig

turbodig

Active member
Re: Code59 - Call for bins

PPI Typhoon said:
Yeah I remember when you used to get attacked for even trying to figure out 3-bar tunes. :roll:
Click to expand...


It's less about sharing bins, vs. learning from what the other guy went through.
This is enabling new mods to be tried, and entire new platforms (Nissan 6-banger, anyone?) to be used. And the future looks good for even more applications that we didn't even intend when we started.

We all go faster, when everybody learns from everybody else. Also, we're spawning a whole new group of driveability junkies, too. :)

Posting someone else's commercial work someplace (ie, non code59) is still uncool, IMO. (Unless they say it's ok)
 
Richie Rich

Richie Rich

New member
Re: Code59 - Call for bins

I have been working with my Ty this week. I have'nt had much time for tunning. I have posted on Code59 my latest bin. I have a lot of tuning to do.

75lber that I can start my Ty with.

Thanks,
Rich
 
Trapper

Trapper

New member
Re: Code59 - Call for bins

Just getting started on code 59 Im goint to down load some bins any help would be appreciated since I dont know much about computers this tuning is going to be hard for me.
 
MRKING

MRKING

New Parts for Old Trucks
Re: Code59 - Call for bins

I dont want to seem like Im not sharing but without driving i have made no tuning changes to the bin I got from maverick . I swear one of these days i will have the drive to finish everything ..
 
turbodig

turbodig

Active member
Re: Code59 - Call for bins

A bump for this, since I'm going through all the posted bins right now and uploading them to the new download area.

I'm betting there are more than few guys that have a pretty decent base tune, following Shindig and some of the other events.

I also see 59 in a lot of people's sigs. If you're running it, post it. If you downloaded it, you agreed to the terms, which was that you'd share the resulting tune. If you haven't modified it from the download bin, pop in with a note to that effect.

A big thanks to those that have shared so far. The V8 guys are showing the V6 guys up, which I'm hoping we can turn around... :)
 
sytyguy

sytyguy

Moderated User
Re: Code59 - Call for bins

Will throw up my 50# bin in a bit, though I imagine it's up already as I've whored that bin out like Adam does his body.

Having just picked up a stock Ty, I'll also have a very refined stock bin up in a few months once I dig my claws into this truck.
 
MRKING

MRKING

New Parts for Old Trucks
Re: Code59 - Call for bins

Truck runs good at start up on mav's 75 bin but right away it goes 9.0-10.2 then bog , bog , bog , silence ..
starts right up again but repeat same condition above . just noticed my fpr adjuster screw was loose and got up to 60 psi . I plan on lowering it to around 40-45ish but wanted to see if mav had a set psi on his tune .

any suggestions ? I dont want to adjust my fpr so idle is on and have the rest of the table suffer so asking more knowledgeable syty gurus seemed in order . TIA
 
You must log in or register to reply here.
Top