FMIC project started.
- Thread starter The Devils Own Chariot
- Start date
The Devils Own Chariot
Active member
The Devils Own Chariot
Active member
Re: FMIC project started.
Had the beast started today for the first time since October.
http://videos.streetfire.net/video/Syclone-Startup-After_682341.htm
Had the beast started today for the first time since October.
http://videos.streetfire.net/video/Syclone-Startup-After_682341.htm
Foot Performance
Donating Member
Re: FMIC project started.
You dont by any chance have intake are temp reading before and after???
You dont by any chance have intake are temp reading before and after???
The Devils Own Chariot
Active member
Re: FMIC project started.
Just had it started. I have not started to tune yet. I can do a comparison. I have old stock A2W intercooler readings.
Just had it started. I have not started to tune yet. I can do a comparison. I have old stock A2W intercooler readings.
Flyin Ryan
hated cuz he drives fords
Re: FMIC project started.
are you going with an electric fan? if so please delete that damn pas side bracket it's an eye sore lol.. mine's been deleted for like two or three years now and don't miss it. Shaved alittle more weight off too
are you going with an electric fan? if so please delete that damn pas side bracket it's an eye sore lol.. mine's been deleted for like two or three years now and don't miss it. Shaved alittle more weight off too
The Devils Own Chariot
Active member
Re: FMIC project started.
I have two 12inch electric fans I use. Im not sure what bracket you are talking about. AC bracket? I will do that eventually. I can only work on so many things at once. Im going to get the truck track worthy first.
I have two 12inch electric fans I use. Im not sure what bracket you are talking about. AC bracket? I will do that eventually. I can only work on so many things at once. Im going to get the truck track worthy first.
The Devils Own Chariot
Active member
Re: FMIC project started.
Thanks again.
Thanks again.
R&C_RallySyTy
Little Big Man
Re: FMIC project started.
Seems to be running well, and nice clean setup. Its so nice when you go to an a/a. I would not have it any other way for a street/strip truck. :tup:
Seems to be running well, and nice clean setup. Its so nice when you go to an a/a. I would not have it any other way for a street/strip truck. :tup:
Foot Performance
Donating Member
The Devils Own Chariot
Active member
Re: FMIC project started.
Here is how the 25g spools on the stock converter. So far so good. Not real bad but not as fast as stock. I just did this in my garage, went to 6psi. I have good breaks
http://s41.photobucket.com/albums/e296/balla50/?action=view¤t=DSCF0296.flv
Here is how the 25g spools on the stock converter. So far so good. Not real bad but not as fast as stock. I just did this in my garage, went to 6psi. I have good breaks
http://s41.photobucket.com/albums/e296/balla50/?action=view¤t=DSCF0296.flv
The Devils Own Chariot
Active member
Re: FMIC project started.
Some custom work I just finished.
Some custom work I just finished.
The Devils Own Chariot
Active member
Re: FMIC project started.
I had the truck on the road last night. Testing out the turbo and the Tial external wastegate. The wastegate will not work in the following configuration.
It will work hooked up like this?
Why?
I had the truck on the road last night. Testing out the turbo and the Tial external wastegate. The wastegate will not work in the following configuration.
It will work hooked up like this?
Why?
Last edited:
midnightbluS10
Banned
Re: FMIC project started.
According to Tial, the top port is either to vent to the atmosphere or you can add air for adjustable boost control.
http://www.tialmedia.com/documents/w3_tial_wginstall.pdf
According to Tial, the top port is either to vent to the atmosphere or you can add air for adjustable boost control.
http://www.tialmedia.com/documents/w3_tial_wginstall.pdf
The Devils Own Chariot
Active member
Re: FMIC project started.
So how in the world is that first diagram ever going to work?
So how in the world is that first diagram ever going to work?
The Devils Own Chariot
Active member
Re: FMIC project started.
Done! Added a MSD coil and found two foul plugs. Runs great and Im ready for tuning.
Done! Added a MSD coil and found two foul plugs. Runs great and Im ready for tuning.
Last edited:
Z SKI
Donating Member
Re: FMIC project started.
Looks real good. However, your wastegate doesn't look like a Tial gate? Maybe that's why its not working???
I had the truck on the road last night. Testing out the turbo and the Tial external wastegate. The wastegate will not work in the following configuration.
It will work hooked up like this?
Why?
Looks real good. However, your wastegate doesn't look like a Tial gate? Maybe that's why its not working???