Re: Got my Ty........... finally
Billtvegas said:
And I will sell you those bad daddy wheels.
Thanks guy. I got the gas down to 1/2 tank filled it back up with 100 octane. Hello rocketship. Then I pick up my 07 vette wheels tomorrow afternoon. Anyone know if I need to space the rear to fit the 10.5"? Also under WOT (with the good gas) full boost it backed down suddenly then the check eng light came on. I noticed a vacum block by the front of the motor 1 hose connected 2 missing? just above the turbo. anyone got any ideas? She Idles pretty rough too.
Thanks for all the info
First of all listen to what others stated and DO NOT GO INTO BOOST untill you go over the truck. Do the tune up and get that out of the way. From what i have read i have seen people blow there motors becasue they dont understand that PING and KNOCK is not good and when you go into boost having these issues you will pay later for a motor rebuild.
On the other hand the reason the check engine light came on and the truck backed down is becasue you are over boosting. Just another way to damage the motor. That block you see is the factory wastegate. It measures up to 14.8 - 15 pounds of boost and then it will stop boosting but if the lines are missing then that means you must have an external so the factory is not in use or by passed. If you dont have an external then you better get those vac lines connected before you go full throttle.
Good luck and use the search button its great.! :tup: