FL Head/cam/intake/turbo package for sale
- Thread starter blk00z28
- Start date
fivetodrive
CRISPY
Re: Head/cam/intake/turbo package for sale
I will take the turbo!
Got pictures of it?
Also shipping to a business 80302
Then PayPal address...
I will take the turbo!
Got pictures of it?
Also shipping to a business 80302
Then PayPal address...
Last edited:
blk00z28
Forced to by choice
Re: Head/cam/intake/turbo package for sale
Ok, I'm going to make this package even better. Even though the turbo is sold, everything else is still for sale.
Additionally, I will include:
-A2A 20"x11"x2.5" IC (it is 30" long from tip to tip)
-Victor Reinz gasket rebuild set
-Jeep steering shaft
-Taylor spark plug wires
-Taylor spark plug wire boots
-Mini starter
-Accessory brackets-the set-(power coated black)
-MSD hei coil
-MSD digital 6 connector
(the headgaskets are shown in pic as they were in the same box with all of this and I didn't show them above.
EVERYTHING that's been posted in this thread(minus turbo because its sold obviously)
$3,850 shipped.
Ok, I'm going to make this package even better. Even though the turbo is sold, everything else is still for sale.
Additionally, I will include:
-A2A 20"x11"x2.5" IC (it is 30" long from tip to tip)
-Victor Reinz gasket rebuild set
-Jeep steering shaft
-Taylor spark plug wires
-Taylor spark plug wire boots
-Mini starter
-Accessory brackets-the set-(power coated black)
-MSD hei coil
-MSD digital 6 connector
(the headgaskets are shown in pic as they were in the same box with all of this and I didn't show them above.
EVERYTHING that's been posted in this thread(minus turbo because its sold obviously)
$3,850 shipped.
Skinny_Army
New Zealand
Re: Head/cam/intake/turbo package for sale
did you ever end up selling the heads and the cam ? How much would you want for these if they are still laying around ?
did you ever end up selling the heads and the cam ? How much would you want for these if they are still laying around ?
RealFastV6
@jb_and_his_coffee
Re: Head/cam/intake/turbo package for sale
He parted it all out over a year ago. I ended up with the heads and intake. I really just needed the rockers but I bought everything. I've been meaning to repost them (heads and intake) for sale but I'm in the middle of moving. Maybe in a month or so.
He parted it all out over a year ago. I ended up with the heads and intake. I really just needed the rockers but I bought everything. I've been meaning to repost them (heads and intake) for sale but I'm in the middle of moving. Maybe in a month or so.
Last edited:
WyoSyclone
Active member
Re: Head/cam/intake/turbo package for sale
I'm looking for a set of those valve covers… still have them??
I'm looking for a set of those valve covers… still have them??
WyoSyclone
Active member
Re: Head/cam/intake/turbo package for sale
I have two sets of brand new Brodix heads that I may be willing to sell…. one is -10 angle plug, CNC ported by Brodix with Manley valves, retainers, etc.
Second set is -8 straight plug, ported from intake manifold thru exhaust by AirFlow Research…3 angle, Manley undercut, swirl polished valves, etc.
Both sets are brand new, never run. -8's have been mounted to a block.
I have two sets of brand new Brodix heads that I may be willing to sell…. one is -10 angle plug, CNC ported by Brodix with Manley valves, retainers, etc.
Second set is -8 straight plug, ported from intake manifold thru exhaust by AirFlow Research…3 angle, Manley undercut, swirl polished valves, etc.
Both sets are brand new, never run. -8's have been mounted to a block.
RealFastV6
@jb_and_his_coffee
I'm looking for a set of those valve covers… still have them??
Negative, only the heads with rockers and intake. I bought a set of those separately from RPM for my Brodix heads.
Sent from my iPhone using Tapatalk.