SC ls1 sy"clone" wannabe project

B

BoostedLSXsyclone

Member
*UPDATE* 08/24/2014: THE 85 BODY IS GONE, I REPLACED IT WITH A 98 BODY.

FOR SALE: 98 S10. AWD, LS1 SWAP READY. NO ENGINE, NO TRANSMISSION
The truck has a pretty straight body with no large dings. Plan was to go turbo but I've lost interest in the truck, I have title in hand

If I can't get close to my asking price I'll either keep it or part it out. I could easily make my asking price by parting out.

Quick list:
2004 ls1 from Gto has less than 50k miles on it (unsure of actual) had 16k when installed (ENGINE AND TRANS HAVE BEEN SOLD!!!!!!!!!!)
4l60e trans SOLD!


Rpm mount kit
Rpm chromoly cross member
Dual piston calipers in the front
Camaro brakes in the rear
Camaro rear 3.42 gear and locker (spring)
Sandblasted and powder coated all wheel drive frame
Qa1 single adj front coil overs From RPM, stock control arms
Corvette 18's rear,17's front
4.3 HD radiator
All new Moog steering components in the front
ARP crank bolt.

Asking 2500 as listed above

I have receipts for all these parts.

I am a little negotiable
My name is Daniel, I am located in Greenville SC. Call or text 864-36zerotwo28three if interested.

PICTURES
UPDATE:THIS FIRST PICTURE IS THE TRUCK AS IT SITS TODAY, 8/24/14 all pictures of frame are still the same, I just swapped the body.
IMG_20140611_134925571.jpg

DSCN2482-1.jpg

DSCN2491-1.jpg

IMG_20130904_185546.jpg

[
IMG_20130904_190510_117.jpg

DSCN2485.jpg

DSCN2486.jpg

DSCN2484-1.jpg
 
Last edited:
B

BoostedLSXsyclone

Member
Re: ls1 sy"clone" wannabe project

The whole reason I put the motor in this truck was to turbo it. Otherwise I would have left it in my 2wd 2nd gen s10.
 
92TYPHOON937

92TYPHOON937

Active member
Re: ls1 sy"clone" wannabe project

ironically i leave for florida in a day could take truck and pick it on way back
 
B

BoostedLSXsyclone

Member
Re: ls1 sy"clone" wannabe project

$5500 in current condition, $6500 with fuel system. I took a buffer and some medium grit compound to the paint the other day, it turned out pretty good where I applied it, so this would be a nice truck if the rest of it is done
IMG_20130605_215845_517.jpg
 
Turbotoyz

Turbotoyz

Member
Re: ls1 sy"clone" wannabe project

Someone should count how many times "I don't have to sell it" turns to "must sell" and "could easily part it out for my asking price..." Then you have to take the rest to the salvage yard. Lol, I think its a cool project. Lost interest or ran into something you don't want to do?
 
B

BoostedLSXsyclone

Member
Re: ls1 sy"clone" wannabe project

Little bit of both, lost interest and don't want to do it. I don't want to dump another 6k that is needed to turbo it. Its not costing me anything just sitting there in my garage, I'm just not motivated , nor do I have the extra funds to get it going right now, fuel lines are going to cost me about $400-500 and I've either got to change that tank to a gravity feed or change my fuel pump to something that can pull fuel from the tank since my fittings are on top. Both of which I don't want to do, that situation is the main thing that has stopped this project unless I can sell the tank for a couple dollars less than what I paid for it and I'll just order the right one and probably stick this thing together
 
You must log in or register to reply here.
Top