my future engine

[10secTy]

Ya sorry did not get back to you I went out of town and then bought a new computer etc. So I have been tied up. Size the injectors to the turbo you decide to run. If you think you might ever go bigger than a 63 you will have to step up to low imp injectors.

All the stuff you need for tuning is pretty simple.
Datamaster
Eprom programmer or Romulator
Piggy back board
and wide band (to really dial it in at high boost)

It is all listed on the web site but it down right now as the server is getting changed.

Nolan

 

[Captain Morgan]

Ya sorry did not get back to you I went out of town and then bought a new computer etc. So I have been tied up. Size the injectors to the turbo you decide to run. If you think you might ever go bigger than a 63 you will have to step up to low imp injectors.

All the stuff you need for tuning is pretty simple.
Datamaster
Eprom programmer or Romulator
Piggy back board
and wide band (to really dial it in at high boost)

It is all listed on the web site but it down right now as the server is getting changed.

Nolan

Hey Nolan, no biggie, I figured things were getting busy since we talked right around the holidays.

Anyway, I read over a bunch of stuff on your site, as well as a few other programing sites.

The shop I was telling you about that has the Syclone at it, well turns out they had a Intronics Pocket Programmer on one of the selves so they basically gave it to me to figure out and get working. Only problem is, they didnt have the software that goes with it, but I do have a programmer in my hands now. The shop has piggy back boards and im sure ill pick up a few for myself along with some chips. I guess the only other thing that needs to be had is the WB 02 which I will look into.

I'll touch base with ya via e-mail sometime here soon. Thanks again for all your help and advice, i really appreciate it.

 

[100in6]

ask jim longwith what the wide o2 he just got was. seems like it cost about half what i thought they used to cost.

 

[Mike from Jersey]

Hey Morgan

I have a shop in Toms River that is doing the machine work on my motor. He is very fair with his prices and does great work, with extensive small block experience (35 years). If you are interested shoot me an email and I'll get you his #. He did my last build and it worked out great.

As to the wideband, try this site... http://www.bnecustoms.com/innovate_motorsports_wide_band.htm

You can't beat the price and a lot of the F-body guys swear by this one.

Good luck on the build

Mike