RenzFab Sportmachines Wrenchfest 2014 (in Williamsport, PA)

Neelsonwheels

Donating Member
Re: RenzFab Sportmachines Wrenchfest 2014 (in Williamsport, PA)

Hi Mike,
I will most likely stay the night. However the snuggle part we will have to see how things go! lol. I have a 6 hour trip to Pa. from Ct.
 

blackty

Active member
Re: RenzFab Sportmachines Wrenchfest 2014 (in Williamsport, PA)

Pretty much depends on what needs to be done.I'm discovering items I forgot I had. Door window rubbers from Tom, harness for behind steering wheel to rid my truck of phantom wiper swipes, digital dash that I haven't painted yet...Going out to do the annual oil change. Hope I don't find anything else...Jim
 

mattw

Active member
Re: RenzFab Sportmachines Wrenchfest 2014 (in Williamsport, PA)

It looks like we are going to have a pretty good turn-out this weekend. Here are some addresses/#s that you may want to save:

Autozone:
711 W THIRD ST
WILLIAMSPORT, PA 17701
(570) 327-6181
Saturday 7:30 AM - 9:00 PM
Sunday 8:30 AM - 7:00 PM


Advance Auto Parts:
1500 Dewey Avenue
Williamsport, PA 17701
(570) 321-1350
Mon - Sat 7:30 am - 9 pm
Sun 9:00 am - 7 pm


Napa:
350 W 3rd St
Williamsport, PA 17701
(570) 326-1991
Sat: 8:00 AM - 5:00 PM
Sun: 10:00 AM - 2:00 PM

These are all within 2 miles of the shop so we shouldn't have an issue getting parts..

The next two are within 4-5 miles:

Harbor Freight:
2062 LYCOMING CREEK RD STE A
Williamsport, PA 17701
Phone: (570) 326-3793
MON - SAT 8:00 AM to 9:00 PM
SUN 9:00 AM to 6:00 PM


Surplus City:
3365 Lycoming Creek Rd
Williamsport, PA 17701
Phone:(570) 494-4119
Sat 8-5
Sun Closted

I have a grill at the shop and in the office there is a full kitchen. Your welcome to use anything but my only ask is that you clean up whatever you use. If you go up into the office please make sure your shoes are clean or take them off. My parents use this as their office/model appartment for student housing so it needs to stay clean.

As far as sleeping goes bring air matresses/sleeping bags/etc if you plan to stay at the shop.. There is plenty of floor space in the office area. If you want nicer accomidations there are plenty of hotels within a few miles..

There is wireless at the shop. It is fed from my home and is provided by the company that I work for. Your welcome to use it but please don't do anything illegal(bit torrent, etc). SSID: wrenchfest Passcode: typhoooon(note the two extra o's).

I plan to drink Saturday night. I drink 7 and 7s. I'll be happy to share but if you want anything else its BYOB.

I'm looking forward to seeing everyone and if I think of anything else I'll add it to this post.
 
Last edited:

MikeRenz

not stock
I.e.... Bring some 7 or at least some 7 for Matt since he is allowing us to use his space so generously

Sent from my XT1030 using Tapatalk
 

blackty

Active member
Re: RenzFab Sportmachines Wrenchfest 2014 (in Williamsport, PA)

What is the ratio of 7 to 7? Not judging, just don't want to show up lop-sided...Jim
 

Sportmachines

Active member
Re: RenzFab Sportmachines Wrenchfest 2014 (in Williamsport, PA)

Before wrenching on sytys, 4:1

After wrenching on sytys: 1:1
 

MikeRenz

not stock
There is also a harbor freight and a surplus city nearby for all your low dollar low quality tool needs. And a dollar general. :lol:

Sent from my XT1030 using Tapatalk
 

sy381

Member
Re: RenzFab Sportmachines Wrenchfest 2014 (in Williamsport, PA)

I have a few things for sale if anyone is interested I'll bring them along this weekend.
*2WD 80E (Renz will post pics later)
*Untouched set of used vortec heads
*A used set of stock heads that were to be redone but after seeing what I got after I blew the motor up they probably didn't have much done to them.
*New right rear sy corner cladding
 
Last edited:

blackty

Active member
Re: RenzFab Sportmachines Wrenchfest 2014 (in Williamsport, PA)

If you drop a tool, squatting, rather than bending over sounds like the way to go here...Jim
 

sharkbait

New member
Re: RenzFab Sportmachines Wrenchfest 2014 (in Williamsport, PA)

I'm on my last day of suspension, trucks not road worthy and my wheels won't be back from powered coat till Saturday morning. I am just gonna show up without my truck. I'll turn wrenches though.
 

Sportmachines

Active member
Re: RenzFab Sportmachines Wrenchfest 2014 (in Williamsport, PA)

Let us know if you theres anything else you guys need so we can be sure to pack and bring it!!!
 

MikeRenz

not stock
Re: RenzFab Sportmachines Wrenchfest 2014 (in Williamsport, PA)

One thing we could use is some oil-clean, spill absorbant, new pig, whatever you happen to call it. So if someone has a spare bag bring it along, or pick some up along the way. We only have a small bit, and the local stores are sold out somehow.
 

Baythan

SY2TY2SY2TY
Re: RenzFab Sportmachines Wrenchfest 2014 (in Williamsport, PA)

I'm out. Sorry to miss it. Just too much going on and truck stuff taking a back seat to everything right now.

Send pics. :(
 
Top