Sonoma GT 0334 - Build Pics
- Thread starter Syborg Twin Turbo
- Start date
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Hey, i've worked really hard trying to keep fit - thanks for noticing
super-gt said:Awefully nice rear-end ya got there Marty
Hey, i've worked really hard trying to keep fit - thanks for noticing
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Good Morning All,
Just a Quick Update
A bunch of new parts showed up for the motor last week.
Close up of the Fuel Block off Plate.
Yep, these are specific to the Chevy V6.
Mike at Race Proven Motors has been working on a bunch of new projects.
One is there new Wastgate and here is what they came up with.
RPM 38mm Wastegate Specs:
Flows 92cfm @ .250" Lift (Outflows several competitors by over 18%)
100% stainless steel body -- Stainless steel valve
Nomex lined diaphram
6-14 psi base spring capability w/ variable adjustment screw
Available in Polished, Red, and Black
Complete Kit Includes:
(1) Wastegate assembly
(2) Mounting flanges
(2) Gaskets
(3) 1/8" NPT hose barb fitting
So you ask is he ready to ship.
Not sure what do you think ?
For purchasing / additional information :
www.raceprovenmotors.com
Price : $249
Good Morning All,
Just a Quick Update
A bunch of new parts showed up for the motor last week.
Close up of the Fuel Block off Plate.
Yep, these are specific to the Chevy V6.
Mike at Race Proven Motors has been working on a bunch of new projects.
One is there new Wastgate and here is what they came up with.
RPM 38mm Wastegate Specs:
Flows 92cfm @ .250" Lift (Outflows several competitors by over 18%)
100% stainless steel body -- Stainless steel valve
Nomex lined diaphram
6-14 psi base spring capability w/ variable adjustment screw
Available in Polished, Red, and Black
Complete Kit Includes:
(1) Wastegate assembly
(2) Mounting flanges
(2) Gaskets
(3) 1/8" NPT hose barb fitting
So you ask is he ready to ship.
Not sure what do you think ?
For purchasing / additional information :
www.raceprovenmotors.com
Price : $249
Tacovendor
New member
Re: Sonoma GT 0334 - Build Pics
Marty I remember seeing this truck in your garage when it you were tossing around the oddfire idea. I'm glad you went this route. I miss the emails so I haven't seen progress in a while. Tell me what age are you planning to live to? LOL Teddy is calling you crazy so you must be nuts. By the way I like the wheels you chose better than the ones you got from me. Anyway awesome job on the rig. Joe
Marty I remember seeing this truck in your garage when it you were tossing around the oddfire idea. I'm glad you went this route. I miss the emails so I haven't seen progress in a while. Tell me what age are you planning to live to? LOL Teddy is calling you crazy so you must be nuts. By the way I like the wheels you chose better than the ones you got from me. Anyway awesome job on the rig. Joe
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Joe,
how did you get bumped from the list - your back on
Tacovendor said:
Joe,
how did you get bumped from the list - your back on
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Good Afternoon All,
Kenny Has been cranking on the truck.
In order to put the chassis together he needed to get a list of Hardware together.
Once it was together we put an order in with Totally Stainless.
Lets just say "Doc" is awesome to work with.
He took my list and pulled it all together in one day.
You say no big Deal - well check out the list at the bottom of this post.
It's 963pcs total and there are still plenty more to order.
This is just the hardware for the chassis.
All of the hardware come bagged & tagged.
All Kenny has to do is look for the bag that states the area he's working
and he's off to the races.
Just another close up of the parts.
Kenny & Travis putting it all together.
It's starting to look like something.
As promised here is the hardware list - WOW !!
Bolt & Washer S-10 Steering Box
1 pcs --- 12mm Clevis Washer - 25mm OD - 3mm Thick - 0.473in ID - .984in oD - .118 THK
1 pcs --- 7/16-14 x 4.18 small Hex Head - Large Flange - High Strength
Upper Ball Joints
8 pcs --- 1/4-20 x 1 Twelve Point - Large Flange - .56in - High Strength
8 pcs --- 1/4 AN Flat Washer - .50in OD - 18-8 SS 6mm Flat Washer
Upper Control Arm
4 pcs --- 1/2-20 x 3 Hex Flange Head - 17-4 PH High Strength
4 pcs --- 1/2-20 Tall Nut - 304 SS - 70,000 Yeild Strength
4 pcs --- 1/2 Split Lock - 18-8 SS
4 pcs --- MS 818 Flat Washer - 1.06in OD - 18-8 SS
Pivot Shaft
4 pcs --- 5/8-18 Nylon Locking Nut - 18-8 SS
4 pcs --- 5/8 x 1 3/4 Body Mount Washer - 1.81 OD - 18-8 SS
Lower Control Arms: ( Drill out 12mm Bushings to 1/2" )
2 pcs --- 1/2-13 x 4 Flanged Hex Head - 17-4 PH High Strength
2 pcs --- 1/2-13 Nylon Locking Nut - 18-8 SS
2 pcs --- 9/16-12 x 4 3/4 hex Flange Head - 17-4 PH High Strength
2 pcs --- 9/16-12 Nylon Locking Nut - 18-8 SS
Idler Arm
4 pcs --- 7/16-14 x 1 Twelve Point - Large Flange - High Strength
4 pcs --- 7/16 AN Flat Washer - .75" OD - 18-8 SS
Caliper Bolts
10 pcs --- 7/16-20 x 2 Twelve Point - Small Flange High Strength
10 pcs --- 7/16 AN Flat Washer - .75in OD - 18-8 SS
Caliper Brackets
opps we ordered the wrong size
8 pcs --- 3/8-24 x 1 Twelve Point - High Strength
4 pcs --- 3/8-24 x 1 1/2 Twelve Point Flange Head High Strength
4 pcs --- 3/8-24 x 2 Twelve Point - High Strength
16 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0 mm OD
Rotor to Hats
32 pcs --- 5/16-18 x 1 Twelve Point - Large Flange - .63in - High Strength
32 pcs --- 8mm Standard Flat Washer - 15.7mm OD 5/16 Flat Washer - .62 OD - Din 125 A2
Four Link & Panhard Bar
10 pcs --- 5/8-11 x 3 Flanged Hex Head - 17-4 PH - High Stength
10 pcs --- 5/8-11 Nylon Locking Nut - 18-8 SS
20 pcs --- 16mm Standard Flat Washer - 29.7mm OD 5/8 Flat Washer
Front Sway Bar
4 pcs --- 3/8-16 x 1 1/4 twelve Point - Large Flange - .63in - High Strength
4 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0 MM OD
Sway Bar Mount
4 pcs --- 1/4-28 x 1 Twelve Point - High Strength
8 pcs --- 1/4 AN Flat Washer - .50in OD - 18-8 SS 6mm Flat Washer - 12.7mm OD
4 pcs --- 1/4-28 Twelve Point Nut - High Strength
Rear Sway Bar
4 pcs --- 3/8-24 x 1 1/4 Twelve Point Flange Head High Strength
8 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD
4 pcs --- 3/8-24 Twelve Point Nut - High Strength
Front Air Bag
4 pcs --- 3/8-24 x 1 1/2 Twelve Point Flange Head High Strength
8 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD
4 pcs --- 3/8-24 Twelve Point Nut - High Strength
Rear Air Bag
4 pcs --- 1/2-13 x 2 1/4in Hex Flange Head - High Strength - 17-4 PH
8 pcs --- 1/2 AN Flat Washer - .875in OD - 18-8 SS 12mm Flat Washer: 22.2mm OD
4 pcs --- 1/2-13 Nylon Locking Nut - 18-8 SS
Transmission Mount
4 pcs --- 3/8-24 x 1 1/2 Six Point (Small Hex Flanged Head) High Strength
4 pcs --- 3/8-24 Twelve Point Nut - High Strength
8 pcs --- MS 813 Flat Washer - .875in OD - 18-8 SS
Fuel Cell, Air Tank & Roll Bar
30 pcs --- 3/8-16 x 1 Twelve Point - Large Flange - .63in - High Strength
30 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD
Intercooler to Frame
4 pcs --- 5/16-24 x 1 1/4 Six Point (Small Hex Flange Head) High Strength
4 pcs --- 5/16-24 Twelve Point Nut High Strength
8 pcs --- 8mm Standard Flat Washer
Fuel Pump, Cooler Lines & Ground Studs
16 pcs --- 1/4-20 Serrated Flange Nut 18-8 SS
16 pcs --- MS 809 Flat Washer - .56in OD 6mm Flat Washer - 14.2mm OD - 18-8 SS
Fuel Pump Ground Stud
1 pcs --- 3/8-16 Serrated Flange Nut - 18-8 SS
1 pcs --- 10mm (0.394 ID) Clevis Washer, 20.5mm (.812) OD, 2.5mm 12 GA. Thick DIN #1440-A2
Dust Sheild
6 pcs --- 3/8-16 x 1 1/4 Twelve Point - Large Flange - .63in - High Strength
6 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD
1 pcs --- Bellhousing Kit - General Motors Vehicles - Automatic Transmission or Aluminum Bellhousing - 1 1/2" High Strength - Small Hex Head
Transmission Pan
20 pcs --- 5/16-18 x 1 Twelve Point - Large Flange - .63in - High Strength
20 pcs --- 8mm Standard Flat Washer - 15.7mm OD 5/16 Flat Washer - .62in OD - DIN 125 A2
Inner Fender
30 pcs --- 1/4-20 x 1/2 Twelve Point - Large Flange High Strength
pcs --- missing washer -- Forgot to Order
Misc Bolts
2 pcs --- 6-1.0 x 25mm 12 Point - High Strength
2 pcs --- 8-1.25mm x 25mm 12 Point - High Strength
20 pcs --- 3/8-24 x 1 Twelve Point - High Strength
28 pcs --- 3/8-24 x 1 1/4 Twelve Point - High Strength
6 pcs --- 3/8-24 x 1 1/2 Twelve Point - High Strength
50 pcs --- 3/8-24 Twelve Point Nut - High Strength
100 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD
100 pcs --- MS813 Flat Washer 0 .875in OD - 18-8 SS
20 pcs --- 5/16-24 x 1 Twelve Point - Large Flange - .63in - High Strength
20 pcs --- 5/16-24 Twelve Point Nut High Strength
40 pcs --- 8mm Standard Flat Washer - 15.7mm OD 5-16 Flat Washer - .63in OD - DIN 125 A2
20 pcs --- 1/4-28 x 1 Twelve Point - High Strength
20 pcs --- 1/4-28 twelve Point Nut - High Strength
40 pcs --- 1/4 AN Flat Washer - .50in OD - 18-8 SS 6mm Flat Washer - 12.7mm OD
Good Afternoon All,
Kenny Has been cranking on the truck.
In order to put the chassis together he needed to get a list of Hardware together.
Once it was together we put an order in with Totally Stainless.
Lets just say "Doc" is awesome to work with.
He took my list and pulled it all together in one day.
You say no big Deal - well check out the list at the bottom of this post.
It's 963pcs total and there are still plenty more to order.
This is just the hardware for the chassis.
All of the hardware come bagged & tagged.
All Kenny has to do is look for the bag that states the area he's working
and he's off to the races.
Just another close up of the parts.
Kenny & Travis putting it all together.
It's starting to look like something.
As promised here is the hardware list - WOW !!
Bolt & Washer S-10 Steering Box
1 pcs --- 12mm Clevis Washer - 25mm OD - 3mm Thick - 0.473in ID - .984in oD - .118 THK
1 pcs --- 7/16-14 x 4.18 small Hex Head - Large Flange - High Strength
Upper Ball Joints
8 pcs --- 1/4-20 x 1 Twelve Point - Large Flange - .56in - High Strength
8 pcs --- 1/4 AN Flat Washer - .50in OD - 18-8 SS 6mm Flat Washer
Upper Control Arm
4 pcs --- 1/2-20 x 3 Hex Flange Head - 17-4 PH High Strength
4 pcs --- 1/2-20 Tall Nut - 304 SS - 70,000 Yeild Strength
4 pcs --- 1/2 Split Lock - 18-8 SS
4 pcs --- MS 818 Flat Washer - 1.06in OD - 18-8 SS
Pivot Shaft
4 pcs --- 5/8-18 Nylon Locking Nut - 18-8 SS
4 pcs --- 5/8 x 1 3/4 Body Mount Washer - 1.81 OD - 18-8 SS
Lower Control Arms: ( Drill out 12mm Bushings to 1/2" )
2 pcs --- 1/2-13 x 4 Flanged Hex Head - 17-4 PH High Strength
2 pcs --- 1/2-13 Nylon Locking Nut - 18-8 SS
2 pcs --- 9/16-12 x 4 3/4 hex Flange Head - 17-4 PH High Strength
2 pcs --- 9/16-12 Nylon Locking Nut - 18-8 SS
Idler Arm
4 pcs --- 7/16-14 x 1 Twelve Point - Large Flange - High Strength
4 pcs --- 7/16 AN Flat Washer - .75" OD - 18-8 SS
Caliper Bolts
10 pcs --- 7/16-20 x 2 Twelve Point - Small Flange High Strength
10 pcs --- 7/16 AN Flat Washer - .75in OD - 18-8 SS
Caliper Brackets
opps we ordered the wrong size
8 pcs --- 3/8-24 x 1 Twelve Point - High Strength
4 pcs --- 3/8-24 x 1 1/2 Twelve Point Flange Head High Strength
4 pcs --- 3/8-24 x 2 Twelve Point - High Strength
16 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0 mm OD
Rotor to Hats
32 pcs --- 5/16-18 x 1 Twelve Point - Large Flange - .63in - High Strength
32 pcs --- 8mm Standard Flat Washer - 15.7mm OD 5/16 Flat Washer - .62 OD - Din 125 A2
Four Link & Panhard Bar
10 pcs --- 5/8-11 x 3 Flanged Hex Head - 17-4 PH - High Stength
10 pcs --- 5/8-11 Nylon Locking Nut - 18-8 SS
20 pcs --- 16mm Standard Flat Washer - 29.7mm OD 5/8 Flat Washer
Front Sway Bar
4 pcs --- 3/8-16 x 1 1/4 twelve Point - Large Flange - .63in - High Strength
4 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0 MM OD
Sway Bar Mount
4 pcs --- 1/4-28 x 1 Twelve Point - High Strength
8 pcs --- 1/4 AN Flat Washer - .50in OD - 18-8 SS 6mm Flat Washer - 12.7mm OD
4 pcs --- 1/4-28 Twelve Point Nut - High Strength
Rear Sway Bar
4 pcs --- 3/8-24 x 1 1/4 Twelve Point Flange Head High Strength
8 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD
4 pcs --- 3/8-24 Twelve Point Nut - High Strength
Front Air Bag
4 pcs --- 3/8-24 x 1 1/2 Twelve Point Flange Head High Strength
8 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD
4 pcs --- 3/8-24 Twelve Point Nut - High Strength
Rear Air Bag
4 pcs --- 1/2-13 x 2 1/4in Hex Flange Head - High Strength - 17-4 PH
8 pcs --- 1/2 AN Flat Washer - .875in OD - 18-8 SS 12mm Flat Washer: 22.2mm OD
4 pcs --- 1/2-13 Nylon Locking Nut - 18-8 SS
Transmission Mount
4 pcs --- 3/8-24 x 1 1/2 Six Point (Small Hex Flanged Head) High Strength
4 pcs --- 3/8-24 Twelve Point Nut - High Strength
8 pcs --- MS 813 Flat Washer - .875in OD - 18-8 SS
Fuel Cell, Air Tank & Roll Bar
30 pcs --- 3/8-16 x 1 Twelve Point - Large Flange - .63in - High Strength
30 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD
Intercooler to Frame
4 pcs --- 5/16-24 x 1 1/4 Six Point (Small Hex Flange Head) High Strength
4 pcs --- 5/16-24 Twelve Point Nut High Strength
8 pcs --- 8mm Standard Flat Washer
Fuel Pump, Cooler Lines & Ground Studs
16 pcs --- 1/4-20 Serrated Flange Nut 18-8 SS
16 pcs --- MS 809 Flat Washer - .56in OD 6mm Flat Washer - 14.2mm OD - 18-8 SS
Fuel Pump Ground Stud
1 pcs --- 3/8-16 Serrated Flange Nut - 18-8 SS
1 pcs --- 10mm (0.394 ID) Clevis Washer, 20.5mm (.812) OD, 2.5mm 12 GA. Thick DIN #1440-A2
Dust Sheild
6 pcs --- 3/8-16 x 1 1/4 Twelve Point - Large Flange - .63in - High Strength
6 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD
1 pcs --- Bellhousing Kit - General Motors Vehicles - Automatic Transmission or Aluminum Bellhousing - 1 1/2" High Strength - Small Hex Head
Transmission Pan
20 pcs --- 5/16-18 x 1 Twelve Point - Large Flange - .63in - High Strength
20 pcs --- 8mm Standard Flat Washer - 15.7mm OD 5/16 Flat Washer - .62in OD - DIN 125 A2
Inner Fender
30 pcs --- 1/4-20 x 1/2 Twelve Point - Large Flange High Strength
pcs --- missing washer -- Forgot to Order
Misc Bolts
2 pcs --- 6-1.0 x 25mm 12 Point - High Strength
2 pcs --- 8-1.25mm x 25mm 12 Point - High Strength
20 pcs --- 3/8-24 x 1 Twelve Point - High Strength
28 pcs --- 3/8-24 x 1 1/4 Twelve Point - High Strength
6 pcs --- 3/8-24 x 1 1/2 Twelve Point - High Strength
50 pcs --- 3/8-24 Twelve Point Nut - High Strength
100 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD
100 pcs --- MS813 Flat Washer 0 .875in OD - 18-8 SS
20 pcs --- 5/16-24 x 1 Twelve Point - Large Flange - .63in - High Strength
20 pcs --- 5/16-24 Twelve Point Nut High Strength
40 pcs --- 8mm Standard Flat Washer - 15.7mm OD 5-16 Flat Washer - .63in OD - DIN 125 A2
20 pcs --- 1/4-28 x 1 Twelve Point - High Strength
20 pcs --- 1/4-28 twelve Point Nut - High Strength
40 pcs --- 1/4 AN Flat Washer - .50in OD - 18-8 SS 6mm Flat Washer - 12.7mm OD
warmpancakes
New member
Re: Sonoma GT 0334 - Build Pics
Told ya doc was the man, he will send ya a holiday card also
Told ya doc was the man, he will send ya a holiday card also
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
I'm hoping for a bottle of something - screw the card.
warmpancakes said:
I'm hoping for a bottle of something - screw the card.
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Your still a loose nut.
Not to worry more pictures next week
TwinTurboV8Ty said:
Your still a loose nut.
Not to worry more pictures next week
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Good Morning All,
Quick Update - Syborg in Print
Make sure you pick up the September Issue of Super Rod Magazine.
Yep, The mighty Mini has struck again.
I want to thank Josh for taking these incredible pictures.
Fuel Injected Media - Revolution Industries, www.rev-in.com
www.sportmachines.com www.syborgtwinturbo.com www.kdhotrods.com www.compfab.com
www.rockfordracecraft.com www.autometer.com www.airbagparts.com www.nitrousexpress.com
www.hydroillusions.com www.revolutionbrake.com www.stainlessworks.net www.billetspecialties.com
www.docskustom.com www.flamingriver.com www.raceprovenmotors.com www.wiresandpliers.com
www.bowlertransmissions.com www.ridetech.com www.hoodpins.net www.carterhickmandesigns.com
www.goodmarkindustries.com www.juxtaposedmachines.com www.belltechcorp.com
www.sparcousa.com www.kicker.com
www.recoveryroominteriors.com
graphic's by --- bob.thrash@yahoo.com
Good Morning All,
Quick Update - Syborg in Print
Make sure you pick up the September Issue of Super Rod Magazine.
Yep, The mighty Mini has struck again.
I want to thank Josh for taking these incredible pictures.
Fuel Injected Media - Revolution Industries, www.rev-in.com
www.sportmachines.com www.syborgtwinturbo.com www.kdhotrods.com www.compfab.com
www.rockfordracecraft.com www.autometer.com www.airbagparts.com www.nitrousexpress.com
www.hydroillusions.com www.revolutionbrake.com www.stainlessworks.net www.billetspecialties.com
www.docskustom.com www.flamingriver.com www.raceprovenmotors.com www.wiresandpliers.com
www.bowlertransmissions.com www.ridetech.com www.hoodpins.net www.carterhickmandesigns.com
www.goodmarkindustries.com www.juxtaposedmachines.com www.belltechcorp.com
www.sparcousa.com www.kicker.com
www.recoveryroominteriors.com
graphic's by --- bob.thrash@yahoo.com
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
not to worry i crry every time i look at my visa
bezerk said:
not to worry i crry every time i look at my visa
WyoSyclone
Active member
Re: Sonoma GT 0334 - Build Pics
Awesome Marty! Can't wait to see it at SEMA
Awesome Marty! Can't wait to see it at SEMA
BigBadSmoosh
Picking fights on I-65 since 2013
Re: Sonoma GT 0334 - Build Pics
I'm planning on ordering from him soon
warmpancakes said:
I'm planning on ordering from him soon
