What did you do to your SY/TY today?
- Thread starter SloGN
- Start date
- Status
Daron
Active member
Re: What did you do to your SY/TY today?
Pretty much how I am doing the Syclone lol. I need doors too. Was thinking of going to manual doors vs electric to continue my "lightweight" theme. Cant decide... Im also considering replacing my whole bed and tailgate if I find a decent rust free example.
Pretty much how I am doing the Syclone lol. I need doors too. Was thinking of going to manual doors vs electric to continue my "lightweight" theme. Cant decide... Im also considering replacing my whole bed and tailgate if I find a decent rust free example.
Josh Young
kirk
jabberwalk
New member
Re: What did you do to your SY/TY today?
Got the wheels back from powder coat. Its the darkest gray that they made in a satin finish. Now I have to figure out center caps.
Got the wheels back from powder coat. Its the darkest gray that they made in a satin finish. Now I have to figure out center caps.
Last edited:
jabberwalk
New member
Re: What did you do to your SY/TY today?
The entire truck is being painted in a satin finish. The body is black, the cladding will be matched to the wheels. Going for the stealth look.
The entire truck is being painted in a satin finish. The body is black, the cladding will be matched to the wheels. Going for the stealth look.
sharkbait
New member
Re: What did you do to your SY/TY today?
cool. whats that called?......murdered out? i love it.:tup:
cool. whats that called?......murdered out? i love it.:tup:
mildtowild
Custom Upholsterer
Re: What did you do to your SY/TY today?
seems like every one here is going satin black lately. i seen an aston martin, new GTR, VWs, civic and a couple of hotrods. was thinking of doing my sunset orange in a satin finish.
seems like every one here is going satin black lately. i seen an aston martin, new GTR, VWs, civic and a couple of hotrods. was thinking of doing my sunset orange in a satin finish.
--SyTy Jim--
GAST Member
Re: What did you do to your SY/TY today?
Can't wait to see it when its done! :tup:
Jimmy
Can't wait to see it when its done! :tup:
Jimmy
syclone rider
New member
Re: What did you do to your SY/TY today?
Put my new autometer es boost gauge and oil pressure gauge and also rewired my lc1 for $59.Need to put my new propshaft on and its track time.
Put my new autometer es boost gauge and oil pressure gauge and also rewired my lc1 for $59.Need to put my new propshaft on and its track time.
fabricator
2280
Re: What did you do to your SY/TY today?
while timing my truck turing the motor over by hand the damm bolt on the crank striped out how much of a hassel will this be to fix.
while timing my truck turing the motor over by hand the damm bolt on the crank striped out how much of a hassel will this be to fix.
s10blaza
BOOSTED
Re: What did you do to your SY/TY today?
That is going to be a bitch to get out.Crank bolts are hardened steel. Using the bolt to press the balancer back on is the worst thing you can do. Try taking the pulley back off to see if maybe you have a couple of threads poking through. If you're lucky you can get a set of vice grips on it. If its broken inside, a cobalt left handed drill bit will probably work, you are going to have to pull the core support, radiator, condenser to use the drill. Or pull the motor and take the crank to a machine shop, or buy a remanufactured crank at a parts store for about the same price. My dad's 350 broke a bolt inside the crank, bought a reman. crank with undersized bearings for $90 and we had the truck together and running that same afternoon
That is going to be a bitch to get out.Crank bolts are hardened steel. Using the bolt to press the balancer back on is the worst thing you can do. Try taking the pulley back off to see if maybe you have a couple of threads poking through. If you're lucky you can get a set of vice grips on it. If its broken inside, a cobalt left handed drill bit will probably work, you are going to have to pull the core support, radiator, condenser to use the drill. Or pull the motor and take the crank to a machine shop, or buy a remanufactured crank at a parts store for about the same price. My dad's 350 broke a bolt inside the crank, bought a reman. crank with undersized bearings for $90 and we had the truck together and running that same afternoon
hatrik8
Donating Member
Re: What did you do to your SY/TY today?
Looks good. What did you do for the rears? Those rotors look similar to the ones I have. Where did you get them?
Looks good. What did you do for the rears? Those rotors look similar to the ones I have. Where did you get them?
95xtreme
New member
Re: What did you do to your SY/TY today?
Sure why not, :lol:
Actually my buddy broke the door handle off the driver side and the door-skin was separating anyway. So I robbed a door off one of the other typhoons and put it on, but then my locks did not match so I swapped on the other door aswell.:tup:
Sure why not, :lol:
Actually my buddy broke the door handle off the driver side and the door-skin was separating anyway. So I robbed a door off one of the other typhoons and put it on, but then my locks did not match so I swapped on the other door aswell.:tup:
bezerk
New member
Re: What did you do to your SY/TY today?
tried to have 2 trucks pass emission,,,,,,spent 3 hours...still no luck, 1 went trough....the other one gave weird values...a lamda of 2.3?/??????????????wtf...this is on their emission tester. i told them their stuff is wack.
they are driving the truck somewhere else to test their tester.
tried to have 2 trucks pass emission,,,,,,spent 3 hours...still no luck, 1 went trough....the other one gave weird values...a lamda of 2.3?/??????????????wtf...this is on their emission tester. i told them their stuff is wack.
they are driving the truck somewhere else to test their tester.
TNPhoon
1of28
Re: What did you do to your SY/TY today?
:rotf: I am picturing it in my head...standing there at the emissions spot going "WTF? Your stuff is whack!"
Make it even more interesting and show up there after a few beers like you do in the chat room.
:rotf: I am picturing it in my head...standing there at the emissions spot going "WTF? Your stuff is whack!"
Make it even more interesting and show up there after a few beers like you do in the chat room.
Daryl H
Donating Member
Re: What did you do to your SY/TY today?
I did the LS1 setup front and rear.
http://brakeperformance.com/site/brake_rotors.php
I did the LS1 setup front and rear.
http://brakeperformance.com/site/brake_rotors.php
- Status