warmpancakes
New member
Re: What did you do to your SY/TY today?
what gloss are the fender wells?
what gloss are the fender wells?
What did you do to your SY/TY today?
- Thread starter SloGN
- Start date
- Status
92TYPHOON937
Active member
Re: What did you do to your SY/TY today?
they look really nice
they look really nice
turrrbo6
Member
Fighting5thSVT
Active member
Re: What did you do to your SY/TY today?
Ding. Automotive black satin I believe is the official name. I'm happy with how they turned out. The driver side one is brand new old stock. It was all scratched up from sitting for years and shipping. Now it actually looks "new".
Ding. Automotive black satin I believe is the official name. I'm happy with how they turned out. The driver side one is brand new old stock. It was all scratched up from sitting for years and shipping. Now it actually looks "new".
Blazerspeed
New member
Re: What did you do to your SY/TY today?
Wow, those came out really good. What company did you go with? I've been looking at a few local places to do some powder work. I've heard really good things about Pro-Tek in Joliet, CMwerks in Burr Ridge, and LoKo in Oak Lawn. If you don't mind me asking, were they reasonable?
Wow, those came out really good. What company did you go with? I've been looking at a few local places to do some powder work. I've heard really good things about Pro-Tek in Joliet, CMwerks in Burr Ridge, and LoKo in Oak Lawn. If you don't mind me asking, were they reasonable?
Fighting5thSVT
Active member
Re: What did you do to your SY/TY today?
Complete Powder Coating of Crest Hill (CPC). He does fantastic work. Pretty reasonable and worth every :2cents:. Here is the web page:
http://www.cpcpowdercoating.com/page1.html
This is my 3rd round of parts I have brought over to him. I have a ton of before/after pics if you want to see some of the work. He did my intake and upper and they turned out perfect.
Let me know if you want to go over there, I will call him ahead of time...
Complete Powder Coating of Crest Hill (CPC). He does fantastic work. Pretty reasonable and worth every :2cents:. Here is the web page:
http://www.cpcpowdercoating.com/page1.html
This is my 3rd round of parts I have brought over to him. I have a ton of before/after pics if you want to see some of the work. He did my intake and upper and they turned out perfect.
Let me know if you want to go over there, I will call him ahead of time...
qbnkiller
Conflaguration Specialist
Re: What did you do to your SY/TY today?
Played around with it a bit...got a little more tuning done on it. Getting ready for this weekend with Jeff Scott and the Bowler Transmission event.
Here is a little 6# launch on the street...enjoy!
Yes I know I have a bulb out on the drivers' side...will get to that tomorrow!!
Played around with it a bit...got a little more tuning done on it. Getting ready for this weekend with Jeff Scott and the Bowler Transmission event.
Here is a little 6# launch on the street...enjoy!
Yes I know I have a bulb out on the drivers' side...will get to that tomorrow!!
Last edited:
92 Ty 1173
Active member
Re: What did you do to your SY/TY today?
Pulled the 20g from my other ty to put on the one with the new engine. Almost done, I can taste it!!!
Pulled the 20g from my other ty to put on the one with the new engine. Almost done, I can taste it!!!
Ruddell
Member
Re: What did you do to your SY/TY today?
Did you buy a old school deck? I like it. You should see the one that mine has from Japan...it was pretty high tech in 93 thats for sure.
Fit's like a glove !!!!
Did you buy a old school deck? I like it. You should see the one that mine has from Japan...it was pretty high tech in 93 thats for sure.
ULTIMA GRAPHIX
New member
Re: What did you do to your SY/TY today?
Well i tryed to open my tailgate and glass and spun the t-handle right off .. And now i cant open it and the hatch button on the dash is working but just wont pop the glass ....
Well i tryed to open my tailgate and glass and spun the t-handle right off .. And now i cant open it and the hatch button on the dash is working but just wont pop the glass ....
Re: What did you do to your SY/TY today?
welll, today I just wanted to change the stock injectors with the 50# ones that I got. took off the driver three, two of them had the plastic piece fall off into the engine.. Then I took off the intake to get at it.. Finaly got them out and i figured, I went this far mid as well take off the valve covers and have my dad throw them in the cleaner at work to get them nice and clean..
long story short, took almost the whole top end of the truck engine off.. if I'm right...
tomorow puting it all back together and hopefully gonna start it up.. with the new injectors in it..
welll, today I just wanted to change the stock injectors with the 50# ones that I got. took off the driver three, two of them had the plastic piece fall off into the engine.. Then I took off the intake to get at it.. Finaly got them out and i figured, I went this far mid as well take off the valve covers and have my dad throw them in the cleaner at work to get them nice and clean..
long story short, took almost the whole top end of the truck engine off.. if I'm right...
tomorow puting it all back together and hopefully gonna start it up.. with the new injectors in it..
nonova0074
Member
Re: What did you do to your SY/TY today?
Washed it, drove it and put in a new car seat for the baby
Washed it, drove it and put in a new car seat for the baby
420
Broke Ass Racing
Re: What did you do to your SY/TY today?
Polished the valve covers and fuel rails, and started working on polishing the stainless steel braided lines. Which reminds me how much I hate braided lines...
Also bought the new subs and amp to redo the speaker setup. 1000 watts of bass :devil:
Polished the valve covers and fuel rails, and started working on polishing the stainless steel braided lines. Which reminds me how much I hate braided lines...
Also bought the new subs and amp to redo the speaker setup. 1000 watts of bass :devil:
- Status