What did you do to your SyTy today? (part 2)
- Thread starter MikeRenz
- Start date
TNPhoon
1of28
Re: What did you do to your SyTy today? (part 2)
Buttoned up the final touches on the rad, fan, pump install.
Pulled it out of the garage.
Spat trans fluid onto the drive.
Got underneath. Retightened the lower trans fitting.
Pulled it back in the garage. Don't even feel like testing it again.
Buttoned up the final touches on the rad, fan, pump install.
Pulled it out of the garage.
Spat trans fluid onto the drive.
Got underneath. Retightened the lower trans fitting.
Pulled it back in the garage. Don't even feel like testing it again.
Jimmy
Banned
Re: What did you do to your SyTy today? (part 2)
Its looking really good,but the cowl seal that is missing needs to be fixed,and the hood hinge seals are missing.
Looks great otherwise.
FYI the cowl seal is no big deal.the hinge gaskets are unobtainable.
Finished cleaning after 5 years of standing still.
Starting point:
After washing:
After several days of polishing and waxing:
Its looking really good,but the cowl seal that is missing needs to be fixed,and the hood hinge seals are missing.
Looks great otherwise.
FYI the cowl seal is no big deal.the hinge gaskets are unobtainable.
Last edited:
Jay92Ty
Donating Member
Re: What did you do to your SyTy today? (part 2)
Looks nice! Big difference in the ride? I'm thinking of getting the full kit for the Sy.
Installed my sportmachine afco shocks and belltech sway bar and 3" lowering blocks
Looks nice! Big difference in the ride? I'm thinking of getting the full kit for the Sy.
JoveDios
1993 Gmc Typhoon #0627
Jay92Ty
Donating Member
Re: What did you do to your SyTy today? (part 2)
thx. I guess I'll be looking into getting it. Looks sweet:tup:
thx. I guess I'll be looking into getting it. Looks sweet:tup:
JoveDios
1993 Gmc Typhoon #0627
Re: What did you do to your SyTy today? (part 2)
Thanks man
I wanna get new leaf springs and re do my rear diff so it looks better
Thanks man
I wanna get new leaf springs and re do my rear diff so it looks better
![Quickstop [UK]](/forums/data/avatars/m/5/5165.jpg?1570199786){kind=avatar}
Quickstop [UK]
Combating adversyty.
Re: What did you do to your SyTy today? (part 2)
http://www.usa1industries.com/1982-93-chevy-s10-gmc-s15-truck-hood-hinge-seal-left.html
:dunno:
http://www.usa1industries.com/1982-93-chevy-s10-gmc-s15-truck-hood-hinge-seal-left.html
:dunno:
Re: What did you do to your SyTy today? (part 2)
They stop leafs'n stuff from going behind the wheel wells? I may have thrown them away in 200something as they were torn and absorbing water like crazy. Thanks for the tip!
They stop leafs'n stuff from going behind the wheel wells? I may have thrown them away in 200something as they were torn and absorbing water like crazy. Thanks for the tip!
Slyclone
Well-known member
Re: What did you do to your SyTy today? (part 2)
Worked on a few things past week. Installed new gas shock lifters for hatch to work the rear defog, as well as replaced the non wiper window with a oem wiper window.Looks 1000% better
At the same time I decided the windshield banner time was up. Removed that as well.
Worked on a few things past week. Installed new gas shock lifters for hatch to work the rear defog, as well as replaced the non wiper window with a oem wiper window.Looks 1000% better
At the same time I decided the windshield banner time was up. Removed that as well.
wildphil
I Love My Ty's
Re: What did you do to your SyTy today? (part 2)
On Tue. I replaced all the rubber brake hoses, wheel cylinders, calipers, master cylinder, And did the ABS delete on the Sy. Yesterday installed my rebuilt trans. in the truck. Need to install the new radiator today I bought just in case after my trans. issue.
Just trying to get up enough energy to go do the work. The 100 degree plus heat index has about done me in.
On Tue. I replaced all the rubber brake hoses, wheel cylinders, calipers, master cylinder, And did the ABS delete on the Sy. Yesterday installed my rebuilt trans. in the truck. Need to install the new radiator today I bought just in case after my trans. issue.
Just trying to get up enough energy to go do the work. The 100 degree plus heat index has about done me in.
Jimmy
Banned
Re: What did you do to your SyTy today? (part 2)
Lol. I should have said right side seals do not exist.
Lol. I should have said right side seals do not exist.
Syclone#892
Member
Re: What did you do to your SyTy today? (part 2)
Its amazing how much better the syclone runs when the cam sensor is not 180 off! Last time I tried starting it with the new ecm it ran but only with the cam sensor disabled and ran poorly. I finally had time to double check things and realized I could potentially have installed the cam sensor 180 off, so I switched it from digital falling to digital rising in the software. Fired right up and sounds great once I finish the ecm wiring I will reinstall the cam sensor correctly and finally onto tuning
Gotta get this thing on the road again
Its amazing how much better the syclone runs when the cam sensor is not 180 off! Last time I tried starting it with the new ecm it ran but only with the cam sensor disabled and ran poorly. I finally had time to double check things and realized I could potentially have installed the cam sensor 180 off, so I switched it from digital falling to digital rising in the software. Fired right up and sounds great
once I finish the ecm wiring I will reinstall the cam sensor correctly and finally onto tuning Gotta get this thing on the road again
Z SKI
Donating Member
Re: What did you do to your SyTy today? (part 2)
Good to hear... What kind of cam sensor setup are you running??
Its amazing how much better the syclone runs when the cam sensor is not 180 off! Last time I tried starting it with the new ecm it ran but only with the cam sensor disabled and ran poorly. I finally had time to double check things and realized I could potentially have installed the cam sensor 180 off, so I switched it from digital falling to digital rising in the software. Fired right up and sounds great
Gotta get this thing on the road again
Good to hear... What kind of cam sensor setup are you running??
Re: What did you do to your SyTy today? (part 2)
Took the Ty out of the garage for the first time in a couple weeks. Drove to the store with my daughter and she told me that (when I punch it) it makes her stomach tingle. Of course I had to do a 15 psi boost launch for her. Now if I can only get that 15 psi boost launch at the track.
Took the Ty out of the garage for the first time in a couple weeks. Drove to the store with my daughter and she told me that (when I punch it) it makes her stomach tingle. Of course I had to do a 15 psi boost launch for her. Now if I can only get that 15 psi boost launch at the track.
pearl91chevy
Donating Member
Re: What did you do to your SyTy today? (part 2)
Took both the lady's to a local cruise in
Took both the lady's to a local cruise in
