What did you do to your SyTy today? (part 2)
- Thread starter MikeRenz
- Start date
Throws
Active member
Re: What did you do to your SyTy today? (part 2)
Yep... It's unspeakably evil how nasty that job is.
FWIW: I put my tank in that same location. :tup:
-P
Yep... It's unspeakably evil how nasty that job is.
FWIW: I put my tank in that same location. :tup:
-P
5678TA
New member
Re: What did you do to your SyTy today? (part 2)
awesome. it wasnt too bad for me or maybe i'm just used to getting my arm covered in oil up to my sleeve. :rotf: i popped the block adapter first and let that drain for a bit before i did much more. some well placed rags kept me clean for the most part. :tup: I went crazy with some wire cutters and cut it in pieces. SOOOOO much more room now. I might even put the crossover for my intake back with a big K&N filter. pretty sure the 3.5"x3" cone is not good for airflow. haha
awesome. it wasnt too bad for me or maybe i'm just used to getting my arm covered in oil up to my sleeve. :rotf: i popped the block adapter first and let that drain for a bit before i did much more. some well placed rags kept me clean for the most part. :tup: I went crazy with some wire cutters and cut it in pieces. SOOOOO much more room now. I might even put the crossover for my intake back with a big K&N filter. pretty sure the 3.5"x3" cone is not good for airflow. haha
Throws
Active member
Re: What did you do to your SyTy today? (part 2)
Mine had apparently leaked enough oil over the years that everything... everything looked like it had been a part of an oil derrick. I'll have to take that damn oil filter adapter out with me next time I go shooting..
*Pull!*
-P
Mine had apparently leaked enough oil over the years that everything... everything looked like it had been a part of an oil derrick. I'll have to take that damn oil filter adapter out with me next time I go shooting..
*Pull!*
-P
Don W.
Stab it and steer it
Re: What did you do to your SyTy today? (part 2)
All well and good. The question is does go any better??? JK, nice.:tup:
Planned, templated, cut, and formed, painted and installed my own DIY-Intercooler scoop.
-P
All well and good. The question is does go any better??? JK, nice.:tup:
Throws
Active member
Re: What did you do to your SyTy today? (part 2)
Not sure... I need to get my WBO2 in and then I'll see if I record a change in temps.
My best guess is ....maybe, but I'd really like a pair of 6" Spal fans sucking in on the back side. I think Ken has something like that.
-P
Not sure... I need to get my WBO2 in and then I'll see if I record a change in temps.
My best guess is ....maybe, but I'd really like a pair of 6" Spal fans sucking in on the back side. I think Ken has something like that.
-P
Throws
Active member
Re: What did you do to your SyTy today? (part 2)
Actually... I think out of everything I did recently, it's a toss between the "Waller 20G" I did and the 3" downpipe-back exhaust. The GPM (grins-per-mile) is stupidly high following both of those. :rock:
-P
Actually... I think out of everything I did recently, it's a toss between the "Waller 20G" I did and the 3" downpipe-back exhaust. The GPM (grins-per-mile) is stupidly high following both of those. :rock:
-P
5678TA
New member
Re: What did you do to your SyTy today? (part 2)
Turbo blanket on
plugs regapped to .028"
also found my rattle/knocking noise. inner fender bolt that attaches to the battery tray was almost completely out. i even shook things around and figured out it was the battery tray but didnt occur to me that the bolts were loose. :doh:
gonna hit DEQ sometime in the next few days. really hope i pass. failed last time i was there (thought i was due but it was registration for a different car, ran it anyway) 400 HC's with only 220 allowed. got my stock chip setup in since i passed with flying colors with it the first time only difference now is 20g, magnaflow cat, 160 stat. will change to a 195 stat if i dont pass.
Turbo blanket on
plugs regapped to .028"
also found my rattle/knocking noise. inner fender bolt that attaches to the battery tray was almost completely out. i even shook things around and figured out it was the battery tray but didnt occur to me that the bolts were loose. :doh:
gonna hit DEQ sometime in the next few days. really hope i pass. failed last time i was there (thought i was due but it was registration for a different car, ran it anyway) 400 HC's with only 220 allowed. got my stock chip setup in since i passed with flying colors with it the first time only difference now is 20g, magnaflow cat, 160 stat. will change to a 195 stat if i dont pass.
Boostin 92
New member
Re: What did you do to your SyTy today? (part 2)
I installed my alky control now I just waiting on my exhaust manifold I bought so I can go test it out
I installed my alky control now I just waiting on my exhaust manifold I bought so I can go test it out
WyoSyclone
Active member
Re: What did you do to your SyTy today? (part 2)
Realized that 3 weeks from today I'll have it on a trailer bringing it out to Oregon from Wyoming
Realized that 3 weeks from today I'll have it on a trailer bringing it out to Oregon from Wyoming
5678TA
New member
Re: What did you do to your SyTy today? (part 2)
:tup: and summer is approaching. i'm ready for the awesome oregon summertime.
BTW, i'm gonna be heading down to Woodburn on Saturday morning to make a few Test'n'Tune runs.
Realized that 3 weeks from today I'll have it on a trailer bringing it out to Oregon from Wyoming
:tup: and summer is approaching. i'm ready for the awesome oregon summertime.
BTW, i'm gonna be heading down to Woodburn on Saturday morning to make a few Test'n'Tune runs.
Black Knight
I Glow Therefore I am
Re: What did you do to your SyTy today? (part 2)
Ha, summer, if that's what you want to call it. You mean the hopefully 2-3 months without overcast and torrential downpour :lol:
Ha, summer, if that's what you want to call it. You mean the hopefully 2-3 months without overcast and torrential downpour :lol:
fauXGT
Brick Pilot
Re: What did you do to your SyTy today? (part 2)
We ain't called the 'Evergreen State' for nuthin:roll:
We ain't called the 'Evergreen State' for nuthin:roll:
5678TA
New member
Re: What did you do to your SyTy today? (part 2)
haha pretty much. but its a great 2-3 months.
haha pretty much. but its a great 2-3 months.
WyoSyclone
Active member
Re: What did you do to your SyTy today? (part 2)
Cool... I'll drive on over and say Hi and hang out for a while.
Cool... I'll drive on over and say Hi and hang out for a while.
5678TA
New member
Re: What did you do to your SyTy today? (part 2)
Awesome. I'll be the guy with the GMC Typhoon. :rotf: I'm aiming to get there by 8am and leave by 1:45pm. hopefully i can get a decent amount of runs in.
Awesome. I'll be the guy with the GMC Typhoon. :rotf: I'm aiming to get there by 8am and leave by 1:45pm. hopefully i can get a decent amount of runs in.
jeepruby04
New member
Re: What did you do to your SyTy today? (part 2)
Put the tonneau cover on that I purchased from Syclone22. It is nice and minty! :tup:
It's on the GT right now because I'm too lazy to swap it with the Sy.
Put the tonneau cover on that I purchased from Syclone22. It is nice and minty! :tup:
It's on the GT right now because I'm too lazy to swap it with the Sy.
Last edited:
SEL777
One of 101
Re: What did you do to your SyTy today? (part 2)
I finally got the Ty JSM coil overs on, and adjusted to my liking in ride height. I tapped 3 of 4 sway bar bolt holes, and the last one broke the friggin tap off in the hole. I tried my easy out...nope. I went and bought another type where you drill a hole...and nope. The bit won't cut anything, tried my bit set, and more of the same. So, I say f-it, I'm gonna take it for it's maiden vovage, and volia...dead battery. I just charged it last week, and figured it was just dead from sittin since October...I guess it's just time to be replaced.
I finally got the Ty JSM coil overs on, and adjusted to my liking in ride height. I tapped 3 of 4 sway bar bolt holes, and the last one broke the friggin tap off in the hole. I tried my easy out...nope. I went and bought another type where you drill a hole...and nope. The bit won't cut anything, tried my bit set, and more of the same. So, I say f-it, I'm gonna take it for it's maiden vovage, and volia...dead battery. I just charged it last week, and figured it was just dead from sittin since October...I guess it's just time to be replaced.