What did you do to your SyTy today? (part 2)

[ukty]

Re: What did you do to your SyTy today? (part 2)

Removed the carpets which are now drying out in the kitchen. Next job is to find out where the water's coming in, then tidy up the floorpan and maybe get some Dynamat installed

 

[ty166]

Re: What did you do to your SyTy today? (part 2)



pulled the cover and showed it some sunlight for the first time in way to long. ordered a few small parts to get her back together, warm weather right around the corner. this is the year I can feel it........lol

 

[fauXGT]

Re: What did you do to your SyTy today? (part 2)

Finished spraying the wrapped headers and axle. Now give them a couple of days to dry.
Plan is to get a bunch of stuff done on the truck this weekend.

 

[Captain Morgan]

Re: What did you do to your SyTy today? (part 2)

I hauled mine out of my friends yard and into my trailer. First time its moved more than 20 feet in about 6 years, it definitely wasn't happy about it.

(sorry for the crap pic, I broke the lens cover on my phone Thursday night, replacement wont be here until Tuesday)

 

[91SYRob]

Re: What did you do to your SyTy today? (part 2)

Driver Door was a pita to close so I put new bushings and pins on and it worked out great.
Raised the Door and lined it back up with the Body Lines and everything :tup:
The Culprit ended up being the top Pin and Bushings





Also did a quicky mount job on my Manual Boost Controller and got rid of almost 2 feet of line

 

[blue83z]

Re: What did you do to your SyTy today? (part 2)

Finally got to dust off the SY and drove her around in some sunlight today. My first winter in north Ohio was...let's say, difficult?

Last Friday and Saturday were ok, this morning was OK and I took the Ty to get the title work done. Now we're in the middle of another blizzard. This winter has sucked.

 

[IRVIN COLON]

Re: What did you do to your SyTy today? (part 2)

nice the hood strut kit for sy ty i like that very very nice

 

[scottyblazinlow]

Re: What did you do to your SyTy today? (part 2)

Last Friday and Saturday were ok, this morning was OK and I took the Ty to get the title work done. Now we're in the middle of another blizzard. This winter has sucked.

Yea, can't wait for the real spring to get here.

 

[Audio Man]

Re: What did you do to your SyTy today? (part 2)

Pulled the throttle body and intake manifold off to fix the intake leak between the upper and lower intake now that I have the gaskets. Went ahead and cleaned up alot while I was in there. Now that the replace the water pump which has been weeping and change the intercooler hoses to rubber hoses and get rid of the metal ones tomorrow. Also going to swap the heat exchanger while I'm doing that to one I have that has been waiting to go in.
Then hopefully in the very near future I can find a 4x4 S10 or Bravada rear diff around here to replace my bad one. Found several around that were out of state and with shipping I could pay for a new ring and pinion installed.

 

[SYCLONE#1531]

Re: What did you do to your SyTy today? (part 2)

Received my carbon fiber wiper delete panel!

 

[SloGN]

Re: What did you do to your SyTy today? (part 2)

well i drove it to the golf course today!!!!!!

 

[Audio Man]

Re: What did you do to your SyTy today? (part 2)

Pulled the water pump off and the nasty pulleys that were on there..power steering and crank pulley were kind of ugly looking. Pulled the stock heat exchanger as well. Gonna reuse the stock bracket to make a new one to mount my aftermarket exchanger. So figured all that out today as well.
Going to mount new electric fan in there as well and get rid of the old metal one with clutch in there I think. Still debating that.

 

[RydinLowSince2000]

Re: What did you do to your SyTy today? (part 2)

Raced it at the track and found out I still have issues Typhoon in burn out box: http://youtu.be/TTkTZPxZVOc

 

[green73]

Re: What did you do to your SyTy today? (part 2)

Installed BellTech leaf springs in the back with JTR setback plates. During tear down, I noticed the old ATR rear sway bar bushings on the links and sway bar itself may as well have not even been there. Luckily the local Vato-Zone had the generic Energy Suspension stuff on the shelf. Step 1 of suspension rebuild done! Now on to the front...yay.

 

[atomicmecha]

Re: What did you do to your SyTy today? (part 2)

Brushed the snow off... AGAIN! :roll:

 

[Captain Morgan]

Re: What did you do to your SyTy today? (part 2)

I removed the gas tank, engine and 3 pieces of cladding

 

[91SYRob]

Re: What did you do to your SyTy today? (part 2)

Brushed the snow off... AGAIN! :roll:

WTF isnt it suppose to be Spring



Oh well it wasnt a total lose I did get to install my new Tonneau cover after work anyway

 

[Static]

Re: What did you do to your SyTy today? (part 2)

I vacuumed it and wiped down all the seats with some saddle soap. Its nice to be driving it finally.

 

[NCTyphoonKid]

Re: What did you do to your SyTy today? (part 2)

Me and my daughter took the Ty out for a spin today 2nd time it's been driven since January

 

[bundie]

Re: What did you do to your SyTy today? (part 2)

pulled it out of storage....hood going to the painter,need to reinstall my propshaft. did new u joints and sleeve.