Syclone project restarted today with pics
- Thread starter bezerk
- Start date
bezerk
New member
Re: Syclone project restarted today with pics
ok. no pics but a small update..
been working on deleting all the electrical wiring, (that i don't need) to make the joined cables thinner, or even deleted.
(going for an ext wastegate, no AC, A2A intercooler. No cuisecontrol, no AC, no EGR.)
so. i can eliminate 3 realays (IC pump, Boost relay, AC relay) and a bunch of connectors.
http://www.syty.huryde.com/wp-content/uploads/2005/12/wiring_rear.gif
will take pics of result.
ok. no pics but a small update..
been working on deleting all the electrical wiring, (that i don't need) to make the joined cables thinner, or even deleted.
(going for an ext wastegate, no AC, A2A intercooler. No cuisecontrol, no AC, no EGR.)
so. i can eliminate 3 realays (IC pump, Boost relay, AC relay) and a bunch of connectors.
http://www.syty.huryde.com/wp-content/uploads/2005/12/wiring_rear.gif
will take pics of result.
bezerk
New member
Re: Syclone project restarted today with pics
bigger update. here you can see most of the wiring harnass done. the only thing still needs work are the cables at the side of the alternator. since i don't know how ans where i''m gonna mount those.
also done are CBR brackets with the C5 brake stuff. budget coilovers from turbotime.
bigger update. here you can see most of the wiring harnass done. the only thing still needs work are the cables at the side of the alternator. since i don't know how ans where i''m gonna mount those.
also done are CBR brackets with the C5 brake stuff. budget coilovers from turbotime.
bezerk
New member
Re: Syclone project restarted today with pics
whole lot of update here.
engine is in. made a little box for the battery. nice blingy allu rad. installed with some modification. big ass soon to be tranny cooler. going to be mounted in the back.
budget coil over from RPM. and a blingy ABS delete from the GP! not sure how this will be mounted with the fenders in.
ooooooh.....and a thingy that goes PSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSssssssssssssssssssssssssssssssssss
pt 67Dbb
enjoy
whole lot of update here.
engine is in. made a little box for the battery. nice blingy allu rad. installed with some modification. big ass soon to be tranny cooler. going to be mounted in the back.
budget coil over from RPM. and a blingy ABS delete from the GP! not sure how this will be mounted with the fenders in.
ooooooh.....and a thingy that goes PSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSssssssssssssssssssssssssssssssssss
pt 67Dbb
enjoy
WyoSyclone
Active member
Re: Syclone project restarted today with pics
Sent you a PM .... blingy ABS is assembled incorrectly...
Sent you a PM .... blingy ABS is assembled incorrectly...
bezerk
New member
Re: Syclone project restarted today with pics
thanks for pointing that one out to me, i'll take a look at it. thanks:tup:
thanks for pointing that one out to me, i'll take a look at it. thanks:tup:
Sent you a PM .... blingy ABS is assembled incorrectly...
bezerk
New member
Re: Syclone project restarted today with pics
well. short update..
the stock wireing is 99% hooked up. waiting for a set of 65lb injectors. and it's almost ready to get fired up.
for all the peeps with the budget coil overs. and having a hard time to get the wrench on the nut to set the load on the spring. cut the last piece off of the key that comes with it. this way you have enough room to make a turn.
further in the pics you can see my ext. tranny cooler and batt. relocate.
well. short update..
the stock wireing is 99% hooked up. waiting for a set of 65lb injectors. and it's almost ready to get fired up.
for all the peeps with the budget coil overs. and having a hard time to get the wrench on the nut to set the load on the spring. cut the last piece off of the key that comes with it. this way you have enough room to make a turn.
further in the pics you can see my ext. tranny cooler and batt. relocate.
bezerk
New member
Re: Syclone project restarted today with pics
i really have no clue. i bought it from a board member and it was from an old GP so i doubt it's a be cool rad.
Andreas
New member
Brassmonkey
Cruzin' Mel Man
Re: Syclone project restarted today with pics
Don't you know you are suppose to use DUCT tape instead of masking tape? J/K, that looks like it's going to be a sweet build. Good luck.
Don't you know you are suppose to use DUCT tape instead of masking tape? J/K, that looks like it's going to be a sweet build. Good luck.
Brassmonkey
Cruzin' Mel Man
Re: Syclone project restarted today with pics
I have a pocket knife just like that.
I have a pocket knife just like that.
bezerk
New member
Re: Syclone project restarted today with pics
lol..i really don't know where it came from. and i did all the work during hours i had time to do some work. that was a time to clean everything up. in the same boat now. it runs, still need to deal with some issues. like the fans to hit on controlled by ecm and have an check engine code. datamaster didn't hook up today. hope it will tomorrow after i switched versions. no leaks though
lol..i really don't know where it came from. and i did all the work during hours i had time to do some work. that was a time to clean everything up. in the same boat now. it runs, still need to deal with some issues. like the fans to hit on controlled by ecm and have an check engine code. datamaster didn't hook up today. hope it will tomorrow after i switched versions. no leaks though