SYTY Spring Cleaning

fivetodrive

CRISPY
I am cleaning my garage and seeing if anyone wants any of this before it goes under the house for another decade :) Send me offers. I wont get offended!
Sorry don't have pictures yet for all of it... Ask and I will take one tonight

Paypal is aaronptimm@yahoo.com

Modded Astro Steering Shafts $70


Jeep steering shafts $45


2 driver side exhaust manifolds $40 each ALL SOLD!

Stock gauge Cluster - $250



Complete upper and lower intake for Syclone or Typhoon with corresponding fuel rail and stock regulator, rebuilt injectors, throttle body and EGR - $500 sold

ACCEL Dual Sync Distributor ($340 on summit) - $250


Full set of 4 Penske Coil Over shocks built specifically for Syclone $1000


New ATR waste gate - $275


Progressive Devils Own Alky Kit. $250 Pending Just needs new lines


Passenger syclone seat $200


Typhoon passenger seat hinge cover $20 - SOLD


Center console bucket $10



40. Ls1 rear disk brake backing plates And rotors SOLD


Logging setup with nice laptop with datamaster configured, new aldl cable and new lc1wideband 250 sold

Logging setup with nice laptop with data master, new aldl cable and Plx devices used wide-band and gauge $300


Nice zero mile rebuilt stock turbo 400 sold

Set of 6 Stock injectors cleaned and flow matched $50 exchange or $100 outright
here is a set being backflushed


Set of 6 stock replacement gen 3 injectors with improved flow $100


Nice volvo 2 speed fan -great flow and easy conversion $60


Full set of excellent condition stock rims with typhoon caps $650 sold

PERFECT and I mean Perfect. Better than the nos one I had that had a wrinkle... Syclone Steering wheel. Was going to put on my truck but it is too nice for either one of my trucks. Even the 40k roller. $400


Pauls select fiberglass passenger door cladding $40 SOLD

Nice Throttle body $50

Non AC pulley $5 SOLD

New (never opened and STILL IN GM BOX) ecm $125 SOLD


Nice Typhoon mirrors - $75

4.0 bore Bowtie block casting # 14011065 -$3000

2 nice syclone stereo surround plastic pieces 25 Pending

More to come...
 
Last edited:

tbauer03

TRBOBOX
Re: SYTY Spring Cleaning

I could use the passenger seat hinge cover. Random but do you happen to have the passenger side PCV "T" setup. I could use that too.
 

fivetodrive

CRISPY
Re: SYTY Spring Cleaning

I could use the passenger seat hinge cover. Random but do you happen to have the passenger side PCV "T" setup. I could use that too.
No luck on the PCV "t" I need one too! mine was melted...

The hinge cover is yours. Paypal me $26 and I will get it out ASAP aaronptimm@yahoo.com

Aaron,
I'll take the ECM and non-AC pulley.
Just to be safe I will put it in a Medium flat rate box. total with shipping is 143.45

I'll take the injectors.
Gen3's? or a set of Stock ones? total with shipping is $106.80
 

fivetodrive

CRISPY
Re: SYTY Spring Cleaning

I'l take both stereo surrounds..
Price to 12047??

Not quite sure on shipping I normally ship flat rate but want to protect them. Let me see what box I can find cause I don't want the tab to break...

I'll take one exhaust manifold
Its heavy so $20 to ship for a total of $60 - These are cheap because they need new studs or to straighten the ones on there...
 

Sy644

DEAF Syclone
Re: SYTY Spring Cleaning

Still have steering shaft? Which best steering shaft Astro or Jeep? Are they bolt on?
 

BigDaveZJ

Member
Re: SYTY Spring Cleaning

I might take the wheels off your hands, I'll call you later this week once I figure out a few things on my end.
 

myty8u

New member
Re: SYTY Spring Cleaning

I am cleaning my garage and seeing if anyone wants any of this before it goes under the house for another decade :) Send me offers. I wont get offended!
Sorry don't have pictures yet for all of it... Ask and I will take one tonight

Paypal is aaronptimm@yahoo.com

Modded Astro Steering Shafts $70


Jeep steering shafts $45


2 driver side exhaust manifolds $40 each ALL SOLD!


Stock gauge Cluster - $250



Complete upper and lower intake for Syclone or Typhoon with corresponding fuel rail and stock regulator, rebuilt injectors, throttle body and EGR - $500


ACCEL Dual Sync Distributor ($340 on summit) - $250


Full set of 4 Penske Coil Over shocks built specifically for Syclone $1000


New ATR waste gate - $275


Progressive Devils Own Alky Kit. $250 Pending Just needs new lines


Passenger syclone seat $200


Typhoon passenger seat hinge cover $20 - SOLD


Center console bucket $10



40. Ls1 rear disk brake backing plates And rotors SOLD


Logging setup with nice laptop with datamaster configured, new aldl cable and new lc1wideband 250


Logging setup with nice laptop with data master, new aldl cable and Plx devices used wide-band and gauge $300


Nice zero mile rebuilt stock turbo 400


Set of 6 Stock injectors cleaned and flow matched $50 exchange or $100 outright
here is a set being backflushed


Set of 6 stock replacement gen 3 injectors with improved flow $100


Nice volvo 2 speed fan -great flow and easy conversion $60


Full set of excellent condition stock rims with typhoon caps $650



PERFECT and I mean Perfect. Better than the nos one I had that had a wrinkle... Syclone Steering wheel. Was going to put on my truck but it is too nice for either one of my trucks. Even the 40k roller. $400


Pauls select fiberglass passenger door cladding $40 SOLD

Nice Throttle body $50

Non AC pulley $5 SOLD

New (never opened and STILL IN GM BOX) ecm $125 SOLD


Nice Typhoon mirrors - $75

4.0 bore Bowtie block casting # 14011065 -$3000

2 nice syclone stereo surround plastic pieces 25 Pending

More to come...

I'll take the complete upper and lower intake manifold of still available?
 

fivetodrive

CRISPY
Re: SYTY Spring Cleaning

Still have steering shaft? Which best steering shaft Astro or Jeep? Are they bolt on?

I have both. and yes a bolt on. Astro does not have a rubber isolator so it has more road feel. The jeeps do and are smoother feel.

I could use two drive shafts plz
$100 shipped paypal aaronptimm@yahoo.com

Interested.....also, any vortec heads or modded lower intakes around?
I do have some lower intakes being welded this week. And i think I have a set of vortec's. Let me check..

I might take the wheels off your hands, I'll call you later this week once I figure out a few things on my end.
no problem 7 20 -933 -76 35
 
Top