Search results

Re: Oil leak help... It was replaced when I bought the truck. :tup:

Re: Oil leak help... I just ordered a throttle body, upper, and lower gasket set and also a 160* thermostat so I should know for sure if my oil leak is fixed. Any hints and tips on doing this?

Re: Where to start with Code $59? Sure have, even with my AFR being ~14.7-15.0 at idle autotune keeps trying to change my tune around. I took all of the tables from 101 up and cranked it up a little bit to see what she did and bam, 10.1 on the wideband. So I think it was just something...

Re: Where to start with Code $59? Yes I have and I've tuned turbo vehicles before, I know how it's supposed to work but for some reason it isn't.

Re: Where to start with Code $59? Alright, so I've been driving around for a while with the turbo hose disconnected so I don't run into boost at all and I just keep having bad luck. In park or neutral the car will idle ~14.7-15.2 AFR but once I put it into any other gear (R-D) then the AFR...

Re: Smokes blue only on start up. Any ideas?? Valve seals, mine are leaking pretty badly too a 154k :)

Re: Stock downpipe flange No thanks, I want to remove that stupid puck on the hotside, what a horrible idea!

Re: Stock downpipe flange I'd just like the flange and cool ass logo and one single o2 bung.

Re: Stock downpipe flange How much would you charge to make an oval flange setup just enough to where I can weld up my own downpipe? Thanks :)

Re: Engine swap in 48 hrs, 5,000 miles? I can has that motor? :D

Re: I got carfax, step up to get yours Re: I got carfax, step up to get yours Sent you an email

Re: Stock downpipe flange Aren't factory exhaust systems 2.5" already? I have to figure out something with this stock turbo setup. The open downpipe is cool and all but it's ratty and rusty :(

Re: Stock downpipe flange I just want to utilize a little higher flowing exhaust and hopefully find some sort of better wastegate management. The car over boosts a little right now (somewhere in the neighborhood of 15-16lbs max) but I'm going to tune it for that with Code59 :)

Re: Stock downpipe flange I was thinking of building something similar to this with a spare exhaust housing that I have, not even possible I'm assuming?

Re: Stock downpipe flange Isn't it possible to remove the puck and run it off there? Doesn't seem that hard at all....

Does anyone know where I can pick one up? I plan on making a 3" downpipe setup w/ a 38mm wastegate setup. Thanks!

Re: Where to start with Code $59? It was hooked up directly into F14 and B9 but it wasn't done with the weatherpack clips until today. I'm on my way to the dealership to grab a few hopefully and get this all finished up and start with the cruise tune.

Re: Where to start with Code $59? Anyone?

Re: Where to start with Code $59? Alright, so I haven't gotten the wideband wired up to the ECM but I've been needing to drive it around anyway because it being my daily driver. Some things that I've noticed and assume because I don't have a narrowband setup that while cruising the truck will...

Re: Oil leak help... I took a look at my oil leak and noticed a plug right underneath the distributor that was wet along with some of the wiring there. I'm going to see if I can snag an upper/lower intake gasket set here soon so I can get this over with!