MO 92 Ty part out

crariley

Donating Member
Re: 92 Ty part out

Do you have the keyless entry receiver inside the center console and does it work? Also the plastic hinge cover on the drivers side seat.

Thanks,
Craig
 

neildemo

Administrator
Re: 92 Ty part out

Entire Interior? Have a clone that needs it :) pm me price...I have a dash. Also internal Wiring Harness..
 

Ellis

Member
Re: 92 Ty part out

I reworded the original post to make it clearer. The cladding has been sold off here over the past couple weeks. The turbo and wheels are also gone. Sorry Ellis, Pau Hana, Syclone0565...
For the rest, I'll go out this afternoon and see what I see. Thanks.

....okay; no problem!.......I could use the fog light switch. Let me know!
 

Jay92Ty

Donating Member
Re: 92 Ty part out

I can use the black moulding around the door handles( exterior). Also the cluster harness if available?. Price/shipping? To 94070. Thx
 

E.Murray

Donating Member
Re: 92 Ty part out

As far as the interior stuff goes, I pm'ed neildemo about the whole thing. If he's not interested in picking it up, I'll reply to individual requests (obviously, it would be nice to get it done in one shot...). In general, though, the dash is cracked in a few places, the carpet is fair (i.e. not real great), On the rest:

Jay92Ty: How about $50 shipped for the escutcheons? The paint is kind of chipped (like the whole truck...).
Slyclone: Is this what you're looking for?

If so, $5 plus shipping. Or if you're buying something else, I'll throw it in.
grimprime221: I have a spare ECM, but no PROM. If it does you any good, $40 shipped.
denny: I don't think it would be worth the shipping on the fenders. There's no real rust or dents, but the paint is absolutely terrible. I can't see shipping some S-10 fenders 2000 miles as super cost-effective...

I'll reply tonight with all the interior stuff if neildemo passes or doesn't reply. Thanks!
 

Jay92Ty

Donating Member
Re: 92 Ty part out

As far as the interior stuff goes, I pm'ed neildemo about the whole thing. If he's not interested in picking it up, I'll reply to individual requests (obviously, it would be nice to get it done in one shot...). In general, though, the dash is cracked in a few places, the carpet is fair (i.e. not real great), On the rest:

Jay92Ty: How about $50 shipped for the escutcheons? The paint is kind of chipped (like the whole truck...).
Slyclone: Is this what you're looking for?

If so, $5 plus shipping. Or if you're buying something else, I'll throw it in.
grimprime221: I have a spare ECM, but no PROM. If it does you any good, $40 shipped.
denny: I don't think it would be worth the shipping on the fenders. There's no real rust or dents, but the paint is absolutely terrible. I can't see shipping some S-10 fenders 2000 miles as super cost-effective...

I'll reply tonight with all the interior stuff if neildemo passes or doesn't reply. Thanks!
I can do $50. I'll send payment later today from home. Thx
 

Slyclone

Well-known member
Re: 92 Ty part out

That is the part. But is there more to it? I need the eyelet end. Looks like it was unplugged from the power lead..

I have a photo I will try to attach..

I will send you a PM with the other stuff looking for.
 
Last edited:

Baythan

SY2TY2SY2TY
Re: 92 Ty part out

In my weirdness...and the fact I don't need any SyTy parts...I'm sitting here trying to figure out what that white car is in the background of middle photo. :rotf:

Thought it might be a Macan but the lines are wrong.

Audi wagon maybe?

I'm stumped. :squint:
 

nastety92

New member
Re: 92 Ty part out

In my weirdness...and the fact I don't need any SyTy parts...I'm sitting here trying to figure out what that white car is in the background of middle photo. :rotf:

Thought it might be a Macan but the lines are wrong.

Audi wagon maybe?

I'm stumped. :squint:

My guess Toyota Venza?
 

E.Murray

Donating Member
Re: 92 Ty part out

In my weirdness...and the fact I don't need any SyTy parts...I'm sitting here trying to figure out what that white car is in the background of middle photo. :rotf:

Thought it might be a Macan but the lines are wrong.

Audi wagon maybe?

I'm stumped. :squint:

Let's make it fun. A set of original Syclone and Typhoon brochures to the first person to correctly identify my wife's car. I've been looking for a place to get rid of them, anyway.
 

E.Murray

Donating Member
Re: 92 Ty part out

Ooooh, nastety92 beat me to the punch by mere seconds. That didn't take long...
If you want the brochures, pm me your address, nastety92.
 

nastety92

New member
Re: 92 Ty part out

Ooooh, nastety92 beat me to the punch by mere seconds. That didn't take long...
If you want the brochures, pm me your address, nastety92.

Thank you very much for the offer. What do these look like? I might already have them. I don't want to take them if it's something that I already have.

Nick
 

Baythan

SY2TY2SY2TY
Re: 92 Ty part out

Dang it! That would've been my next guess but I couldn't think of the name of that thing. I was looking up "Vienta" etc. :rotf:

Okay, thanks for indulging the distraction.

Back to part out...
 

E.Murray

Donating Member
Re: 92 Ty part out

12secondSy: Here are the speaker grilles. Not super. One side has some cracks in the rear edge. The other is missing a corner. Let me know if you're still interested. We'll figure shipping then add $5 for both.


rman2424: I'd rather not sell the plastic parts off the seat until I see if somebody wants the whole seat. The keyless thing isn't likely. The truck had a whole different setup. On the crossover pipe, this truck had a cold air kit with not pipe. Sorry...
Slyclone: I do have the whole thing including the rest of the plug with the eyelet for the underhood light. Also, here's a picture of the switches:

grimprime21: Is this the return line you're looking for?

blazengmc: Here's the dash cluster. It's in great shape. The only thing (downside or upside, depending on your taste) is that it has white gauge faces and a backlighting thing that can be adjusted from blue to green. He had the adjustment knob mounted under the gauges to the left of the steering wheel (looked decent, actually). On the wiring, it's two splices behind the cluster (I took pics).


TyGuy1: I don't think my lock surround is any better than yours. I do have the dual window switch, but it doesn't look like there are any connectors. Where would you like it cut?

randy merritt: The steering wheel isn't the stocker. It's a Momo (on a Jeep shaft if it matters). Recently installed. Still interested?

Ellis: The fog light switch is in great condition. $15 shipped.
 

Jamerjoe

Member
Re: 92 Ty part out

I need the passenger side exhaust manifold. How's the condition? Also might be interested in the steering wheel if other dude backs out. Also how's the carpet? Let me know
 

E.Murray

Donating Member
Re: 92 Ty part out

I need the passenger side exhaust manifold. How's the condition? Also might be interested in the steering wheel if other dude backs out. Also how's the carpet? Let me know

Sorry, but I don't have any stock manifolds. It had ATR headers (which are for sale in a separate thread).
Steering wheel is $50 shipped. First one to send the money gets it.
Carpet isn't worth shipping. It's about like you'd expect for 128k miles.
 
Top