FS Holset HX40w turbo
- Thread starter typhoon92
- Start date
killa66cam
RIDIN DIRTY
Re: FS Holset HX40w turbo
Could you post up some pics and specs of what type of build this turbo would be good for?
Cam
Could you post up some pics and specs of what type of build this turbo would be good for?
Cam
Treymen
Donating Member
Re: FS Holset HX40w turbo
I think I found the specs for it:
Cummins Diesel 6CTAA Same as Holset PN:4050036 Dodge
Universal can be modified to Fit on all cars and trucks
4" Inlet Diameter
3" Compressor Outlet Diameter
Garrett T4 Divided Entry Exhaust Inlet ( cummins 5.9L use T3)
4" Exhaust V-Band Outlet
Journal Bearing - Wet Float Type
Oil Lub/Cool
800 HP+
Wastegate set at 20 Psi
Compressor Wheel
72 lb/min Air Flow
8 Blades
Ind: 56.60 mm
Exd: 74.71 mm
Trim: 54.8
Turbiner Wheel
4" V-Band
Ind: 76 mm
Exd: 64 mm
Are 60# injectors gonna be enough for this turbo?
I think I found the specs for it:
Cummins Diesel 6CTAA Same as Holset PN:4050036 Dodge
Universal can be modified to Fit on all cars and trucks
4" Inlet Diameter
3" Compressor Outlet Diameter
Garrett T4 Divided Entry Exhaust Inlet ( cummins 5.9L use T3)
4" Exhaust V-Band Outlet
Journal Bearing - Wet Float Type
Oil Lub/Cool
800 HP+
Wastegate set at 20 Psi
Compressor Wheel
72 lb/min Air Flow
8 Blades
Ind: 56.60 mm
Exd: 74.71 mm
Trim: 54.8
Turbiner Wheel
4" V-Band
Ind: 76 mm
Exd: 64 mm
Are 60# injectors gonna be enough for this turbo?
Re: FS Holset HX40w turbo
Here is the turbo mounted on the syclone
http://www.youtube.com/watch?v=x2tvvjmf4hc
Here is the turbo mounted on the syclone
http://www.youtube.com/watch?v=x2tvvjmf4hc
VIPERRACING
New member
Re: FS Holset HX40w turbo
I bought the adapter
http://parts-champion.amazonwebstore.com/T3-to-T4-Stainless-Steel-Flange/M/B002UIDN4U.htm
I bought the adapter
http://parts-champion.amazonwebstore.com/T3-to-T4-Stainless-Steel-Flange/M/B002UIDN4U.htm
VIPERRACING
New member
Re: FS Holset HX40w turbo
So with the adapter you have NO clearance issues with the t4 turbo using the stock iron manifolds & crossover or did you have to delete any of the accessories or modify anything to make it fit?
So with the adapter you have NO clearance issues with the t4 turbo using the stock iron manifolds & crossover or did you have to delete any of the accessories or modify anything to make it fit?
Re: FS Holset HX40w turbo
I had no clearance issues with this adapter,turbo was mounted on the stock exhuast maniolds as you can see in the video the syclone has no AC,I did have to cut a small section of the inner fender wheel,other than that i had no other issues.
I had no clearance issues with this adapter,turbo was mounted on the stock exhuast maniolds as you can see in the video the syclone has no AC,I did have to cut a small section of the inner fender wheel,other than that i had no other issues.
VIPERRACING
New member
Re: FS Holset HX40w turbo
From what I can see from the video it looks like you have the rpm a/c delete that actually deletes the entire pulley & bracket. Im running a gm a/c delete bracket & pulley which I think will hit the turbo.
From what I can see from the video it looks like you have the rpm a/c delete that actually deletes the entire pulley & bracket. Im running a gm a/c delete bracket & pulley which I think will hit the turbo.
Re: FS Holset HX40w turbo
I don't think it would hit the ac delte bracket & pulley,but I might be wrong
I don't think it would hit the ac delte bracket & pulley,but I might be wrong