Hydroboost unit with master cylinder and proportioning valve $75

1

1BADV6

Donating Member
Re: Hydroboost unit

Re: Hydroboost unit

I'll take one, let me know what shipping is to 18929. Is Paypal OK?

thanks,
 
fivetodrive

fivetodrive

CRISPY
Re: Hydroboost unit with master cylinder and propotioning valve $75

Re: Hydroboost unit with master cylinder and propotioning valve $75

I pulled two more of these. Let me know if you want one!

Shipping has been less than $20 in the lower 48...
 
Skyhighsami

Skyhighsami

GMC Typhoon #1308
Re: Hydroboost unit with master cylinder and proportioning valve $75

Is this everything I need to convert to Hydroboost minus the lines from the pump correct?
 
Xtrempickup

Xtrempickup

All turbo All the time
Re: Hydroboost unit with master cylinder and proportioning valve $75

i hope you are not just selling these and who knows if they are good. i just replaced one in a diesel and it was 300$ after core charge. you can not rebuild this yourself, and yes they do go bad and leak and then you have both a steering and braking problem at the same time
 
fivetodrive

fivetodrive

CRISPY
Re: Hydroboost unit with master cylinder and proportioning valve $75

Yes, all that is needed is the power steering lines and a T. You can go with braided or get a set for an early 90's full size GM Truck and modify them to fit.

These are off an astro van. Nothing nearly as stressful as a deisel. I look at every unit and make sure they are not leaking or I will not pull them.

And I will guarantee that they are good.
 
Skyhighsami

Skyhighsami

GMC Typhoon #1308
Re: Hydroboost unit with master cylinder and proportioning valve $75

Where do I get the braided lines from? I would like to make all the lines on the truck braided so they look nice.
 
Icarus-54

Icarus-54

Donating Old Member
Re: Hydroboost unit with master cylinder and proportioning valve $75

Aaron,
Do you yake paypal?I'm interested in one.
Jack
 
J

JuStBlAzIN

Active member
Re: Hydroboost unit with master cylinder and proportioning valve $75

I need to read about this setup a little more. But will you consistently be getting these units?
 
Matt

Matt

Active member
Re: Hydroboost unit with master cylinder and proportioning valve $75

What is the total with shipping to canada?
 
fivetodrive

fivetodrive

CRISPY
Re: Hydroboost unit with master cylinder and proportioning valve $75

$100 shipped to canada!

Still have two...
 
Last edited:
fivetodrive

fivetodrive

CRISPY
Re: Hydroboost unit with master cylinder and proportioning valve $75

Tripped over this thing again... Anyone need one? If not I will be modifying the rod by cutting and threading it. Still trying to find coupling nuts locally... It will be a good way to put my new tap and die set to use...

LMK...
 
Quickstop [UK]

Quickstop [UK]

Combating adversyty.
Re: Hydroboost unit with master cylinder and proportioning valve $75

OK,

the unit I have in my possession is the wrong one:

DSC00176.jpg


If we are still good then can you ship mine to the address I gave you?

Thanks for hanging on there!

Mark
 
NecroWolf

NecroWolf

lost marbles member
Re: Hydroboost unit with master cylinder and proportioning valve $75

am i looking at MRKING's diagram right? it can be hooked up in place of the power steering cooler can't it? after getting the lines, i could just bolt one up and go right, well stop?
 
T

TDSRacing

New member
Re: Hydroboost unit with master cylinder and proportioning valve $75

Let me know if you still have a nice one and I will send money. 65804
 
You must log in or register to reply here.
Top