Hydroboost unit with master cylinder and proportioning valve $75

Re: Hydroboost unit with master cylinder and proportioning valve $75

fivetodrive has exceeded their stored private messages quota and can not accept further messages until they clear some space.

PM pasted:

i have a 1992 s10 2wd. i need to buy both a hydroboost unit and a steering shaft from you. let me know the total shipped to 78130 and your paypal address. well i guess before i pay i should ask if you see any compatibality problems w/ either item since my truck is 2wd. thanks!
 

fivetodrive

CRISPY
Re: Hydroboost unit with master cylinder and proportioning valve $75

NecroWolf said:
am i looking at MRKING's diagram right? it can be hooked up in place of the power steering cooler can't it? after getting the lines, i could just bolt one up and go right, well stop?

Yes that would work fine. MRKING's writeup was the best one out there! I will be buying the braded lines when my truck gets back on the road. It will be very shiney!!!

TDSRacing said:
Let me know if you still have a nice one and I will send money. 65804

I have three nice one in the storage unit. I will try to get pics today!

FirstGenZq8 said:
fivetodrive has exceeded their stored private messages quota and can not accept further messages until they clear some space.

PM pasted:

i have a 1992 s10 2wd. i need to buy both a hydroboost unit and a steering shaft from you. let me know the total shipped to 78130 and your paypal address. well i guess before i pay i should ask if you see any compatibality problems w/ either item since my truck is 2wd. thanks!

Cleared some PM's and sent you one!
 
Last edited:

fivetodrive

CRISPY
Re: Hydroboost unit with master cylinder and proportioning valve $75

I have two of these units ready to go. Found some parts for Project Crispy just need some $$$
 

bezerk

New member
Re: Hydroboost unit with master cylinder and proportioning valve $75

i was wondering, does this setup works with disc disc?
 

fivetodrive

CRISPY
Re: Hydroboost unit with master cylinder and proportioning valve $75

They would work fine. It would be best if you changed out the proportioning valve to an adjustable one so that you can adjust the brake bias. They are pretty affordable!
 

bezerk

New member
Re: Hydroboost unit with master cylinder and proportioning valve $75

nice, you still have a unit?
 

bezerk

New member
Re: Hydroboost unit with master cylinder and proportioning valve $75

sweet, do they also have a plate too mount them? or do you happen to know another solution,
 

fivetodrive

CRISPY
Re: Hydroboost unit with master cylinder and proportioning valve $75

I will include a plate but it aint pretty... You will need to clean it up, but it will give you an idea of what to do!
 

bezerk

New member
Re: Hydroboost unit with master cylinder and proportioning valve $75

sweet.. i gotta be honest. 1 more month untill we get paid for the apartment we sold. than i'll pp you the $$
 

fivetodrive

CRISPY
Re: Hydroboost unit with master cylinder and proportioning valve $75

Thanks. I tried to cover a lot of stuff in a short amount of time.
 
Top