Project "TURBONOMA" begins
- Thread starter Sy-Clone
- Start date
HIGH NOON TYPHOON
I KNOW CHUCK NORRIS
Re: Project "TURBONOMA" begins
looks SICK ! , where did you get the bonnet ? what manufacturer is it ?
looks SICK ! , where did you get the bonnet ? what manufacturer is it ?
WyoSyclone
Active member
Re: Project "TURBONOMA" begins
Wow.. looks great Tony... some really nice, clean work!
I haven't read the entire thread and I've never researched it, but would the front accessory brackets you're using bolt to the SyTy block? Would sure be nice to use the updated A/C compressor, and get it over on that side of the motor!
Wow.. looks great Tony... some really nice, clean work!
I haven't read the entire thread and I've never researched it, but would the front accessory brackets you're using bolt to the SyTy block? Would sure be nice to use the updated A/C compressor, and get it over on that side of the motor!
Sy-Clone
Boost Junkie
Re: Project "TURBONOMA" begins
I have no knowledge of the sy/ty blocks, so I can't say if the acc.brackets will work or not. There should be someone here that must know. By the way, I've always wanted a sy but couldn't find one here on the island(Puerto Rico) Your project is sweeet! PEACE>Tony
I have no knowledge of the sy/ty blocks, so I can't say if the acc.brackets will work or not. There should be someone here that must know. By the way, I've always wanted a sy but couldn't find one here on the island(Puerto Rico) Your project is sweeet! PEACE>Tony
UR50SLO
V6+2=LSXCamaro
Re: Project "TURBONOMA" begins
There's a thread on A/C that many of us talked about this very issue. I think the newer A/C compressor and system works much better than the older ones. All the front accrys from the 94up trucks work on the old Sy/Ty block/heads. There's a guy on here that has it all installed on his Ty/Sy already.
I'm planning on using the newer setup when I tear the engine back out of my wife's truck here real soon.
It'll all work... I have Typhoon manifolds/turbo on our 98 Jimmy.. all works together fine.
Hope that helps,
Scott~
There's a thread on A/C that many of us talked about this very issue. I think the newer A/C compressor and system works much better than the older ones. All the front accrys from the 94up trucks work on the old Sy/Ty block/heads. There's a guy on here that has it all installed on his Ty/Sy already.
I'm planning on using the newer setup when I tear the engine back out of my wife's truck here real soon.
It'll all work... I have Typhoon manifolds/turbo on our 98 Jimmy.. all works together fine.
Hope that helps,
Scott~
Sy-Clone
Boost Junkie
Re: Project "TURBONOMA" begins
PEACE>Tony
he he...Don't worry I located the clamps in place guys.I downloaded the cal.file. The engine turns over but won't start. Need to check the usual stuff first like timing,spark,and making sure the injectors are working.TurboTony said:
PEACE>Tony
WyoSyclone
Active member
Re: Project "TURBONOMA" begins
Cool! Thanks Scott... seems like it would be a pretty nice upgrade
UR50SLO said:There's a thread on A/C that many of us talked about this very issue. I think the newer A/C compressor and system works much better than the older ones. All the front accrys from the 94up trucks work on the old Sy/Ty block/heads. There's a guy on here that has it all installed on his Ty/Sy already.
I'm planning on using the newer setup when I tear the engine back out of my wife's truck here real soon.
It'll all work... I have Typhoon manifolds/turbo on our 98 Jimmy.. all works together fine.
Hope that helps,
Scott~
Cool! Thanks Scott... seems like it would be a pretty nice upgrade
Sy-Clone
Boost Junkie
Re: Project "TURBONOMA" begins
Well after coming back home,I checked out the electricals and it looks ok. I have spark at the coil but I discovered some other gas leaks around the Y block in the rear of the mani. I also noticed I have no fuel pressure or at least the gage is not registering it now.@#$%&* seems like when I get close to firing it up, something else shows it's ugly face and throws a wrench at me. PEACE>Tony
Well after coming back home,I checked out the electricals and it looks ok. I have spark at the coil but I discovered some other gas leaks around the Y block in the rear of the mani. I also noticed I have no fuel pressure or at least the gage is not registering it now.@#$%&* seems like when I get close to firing it up, something else shows it's ugly face and throws a wrench at me. PEACE>Tony