Sonoma GT 0334 - Build Pics
- Thread starter Syborg Twin Turbo
- Start date
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Good Afternoon All,
I've been working with Bob Thrash to come up with a car show display.
We are only planning to do a couple indoor shows but we need to have a display.
Ron from WMC Design & Engineering
Converted Bob's Sketch into a digital & Cad Drawings.
Some of you may know Ron from www.hoodpins.com
I've worked with Ron on the Hood Pins & Brake Pedal Assembly.
ron@hoodpins.net
We are also going to be using lightweight glassless mirrors from
www.glasslessmirror.com
More to come next week From Kenny.
He's been busy working on Dad's 57
Good Afternoon All,
I've been working with Bob Thrash to come up with a car show display.
We are only planning to do a couple indoor shows but we need to have a display.
Ron from WMC Design & Engineering
Converted Bob's Sketch into a digital & Cad Drawings.
Some of you may know Ron from www.hoodpins.com
I've worked with Ron on the Hood Pins & Brake Pedal Assembly.
ron@hoodpins.net
We are also going to be using lightweight glassless mirrors from
www.glasslessmirror.com
More to come next week From Kenny.
He's been busy working on Dad's 57
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
soon - i'm heading back to Kenny's in two weeks to get it running.
My schedule isn't allowing me to get there anytime sooner.
soon - i'm heading back to Kenny's in two weeks to get it running.
My schedule isn't allowing me to get there anytime sooner.
H-TOWN-TYPHOON
You're killin' me, Smalls
Re: Sonoma GT 0334 - Build Pics
REEEEHEEEEDICULOUS
It all looks great! :tup:
REEEEHEEEEDICULOUS
It all looks great! :tup:
phoonTy
Truckless. For now.
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Hi All,
First off I am very sorry for the slow updates.
We should be back on track next week
I figured I would show you the Valve Covers
Rich from Milton Paint Werks prepped them for Bob.
miltonpaintwerks@yahoo.com
Here's Bob - laying out the stencils for the graphics
Teaser of what they may look like.
I will post some pics tomorrow of all of the prepwork that went into these to get the ready for graphics
Hi All,
First off I am very sorry for the slow updates.
We should be back on track next week
I figured I would show you the Valve Covers
Rich from Milton Paint Werks prepped them for Bob.
miltonpaintwerks@yahoo.com
Here's Bob - laying out the stencils for the graphics
Teaser of what they may look like.
I will post some pics tomorrow of all of the prepwork that went into these to get the ready for graphics
jjorgensen52
NHSTE - I'm the only one!
Re: Sonoma GT 0334 - Build Pics
nice valve covers ... nice C-10 in the background too :tup:
nice valve covers ... nice C-10 in the background too :tup:
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Good Morning All,
I know this post is a little out of sequence.
Rich understand what it takes to prep the valve covers for Bob.
Rich & Bob have been working together for years.
miltonpaintwerks@yahoo.com
Intake Tube Prepped and ready for final Paint.
Notice the Rendering in the background one of my top 10 favorite cars.
The goal was to keep the welds visible since they add to the look of the motor.
All primed and ready for paint.
Milton Paint Werks - miltonpaintwerks@yahoo.com
Good Morning All,
I know this post is a little out of sequence.
Rich understand what it takes to prep the valve covers for Bob.
Rich & Bob have been working together for years.
miltonpaintwerks@yahoo.com
Intake Tube Prepped and ready for final Paint.
Notice the Rendering in the background one of my top 10 favorite cars.
The goal was to keep the welds visible since they add to the look of the motor.
All primed and ready for paint.
Milton Paint Werks - miltonpaintwerks@yahoo.com
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
about another 25 grand it should be done - wanna help the fund
about another 25 grand it should be done - wanna help the fund
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Good Morning All,
Yep, Kenny wanted to kill me but we just had to do it.
First Off Billet Specialties makes one of the cleanest Serpentine Systems
Tru Trac Serpentine Systems
http://www.billetspecialties.com/product.asp?cid=23&scid=182
Our goal was to remove some of the lines under the hood to try to clean things up just a little bit.
I talked with the Scott over at Billet Specialties and the had me Contact DSE and order one of there pumps.
Mark at DSE stepped in and put together all of the parts I would need to swap in the new pump.
Two day's later all of the parts arrived and I headed over to Billet Specialties where they installed the new pulley.
Polished Aluminum Power Steering Pump w/Intergral Reservoir 090901P
(-6) DSE Pressure Line for Integral Reservoir Pump 091702
1/4" NPT to -6 Return Fitting 091501
Power Steering Pulley TTC-13212
I'll try to post some before and after pics next week.
Update: Syborg Build Posters Coming Soon !!
Good Morning All,
Yep, Kenny wanted to kill me but we just had to do it.
First Off Billet Specialties makes one of the cleanest Serpentine Systems
Tru Trac Serpentine Systems
http://www.billetspecialties.com/product.asp?cid=23&scid=182
Our goal was to remove some of the lines under the hood to try to clean things up just a little bit.
I talked with the Scott over at Billet Specialties and the had me Contact DSE and order one of there pumps.
Mark at DSE stepped in and put together all of the parts I would need to swap in the new pump.
Two day's later all of the parts arrived and I headed over to Billet Specialties where they installed the new pulley.
Polished Aluminum Power Steering Pump w/Intergral Reservoir 090901P
(-6) DSE Pressure Line for Integral Reservoir Pump 091702
1/4" NPT to -6 Return Fitting 091501
Power Steering Pulley TTC-13212
I'll try to post some before and after pics next week.
Update: Syborg Build Posters Coming Soon !!
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
hopefully Kenny figures out how to upload the video to the site
so maybe tommorow
hopefully Kenny figures out how to upload the video to the site
so maybe tommorow
JuStBlAzIN
Active member
Re: Sonoma GT 0334 - Build Pics
MARTY will there be SEMA in 2010? or any other shows in the west? Or is this going to make me fly out from CALIFORNIA to go see it at NATS?
MARTY will there be SEMA in 2010? or any other shows in the west? Or is this going to make me fly out from CALIFORNIA to go see it at NATS?
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Good Afternoon All,
I've had the pleasure of working with Poster by Simon the past couple weeks.
He posted up that he was willing to do some posters on one of the BB's.
http://www.pro-touring.com/forum/showthread.php?t=51938
I contacted him immediately and asked if he would be interested in doing a series of Posters.
So far two have been completed and we are just beginning to work on the 3rd.
Simon has been a pleasure to work with and am looking forward to seeing
what he comes up with next.
You can contact him at posters@simonholm.com
The size of the poster is 20"x30" (50x75cm)
printed on high quality glossy Kodak photo paper.
Delivery time is about 2 weeks.
Price examples:
1 Poster: $16.00 + $17.00 Shipping
3 Posters: $45.00 + $17.00 Shipping
6 Posters: $90.00 + $17.00 Shipping
ps -- as some of you may know the truck is running and yes i am behind with my updates.
Good Afternoon All,
I've had the pleasure of working with Poster by Simon the past couple weeks.
He posted up that he was willing to do some posters on one of the BB's.
http://www.pro-touring.com/forum/showthread.php?t=51938
I contacted him immediately and asked if he would be interested in doing a series of Posters.
So far two have been completed and we are just beginning to work on the 3rd.
Simon has been a pleasure to work with and am looking forward to seeing
what he comes up with next.
You can contact him at posters@simonholm.com
The size of the poster is 20"x30" (50x75cm)
printed on high quality glossy Kodak photo paper.
Delivery time is about 2 weeks.
Price examples:
1 Poster: $16.00 + $17.00 Shipping
3 Posters: $45.00 + $17.00 Shipping
6 Posters: $90.00 + $17.00 Shipping
You can see other posters that Simon created at:
http://posters.simonholm.com
http://posters.simonholm.com
ps -- as some of you may know the truck is running and yes i am behind with my updates.
Last edited: