Sonoma GT 0334 - Build Pics

[Syborg Twin Turbo]

Re: Sonoma GT 0334 - Build Pics

Good Evening All,

I felt it was neccessary to show off the detail that Bob Thrash did on the paint job.

AC Condenser Mounted

Close up the Core Support

Radiator Cover

The lower part of the Core Support had to be removed to gain clearance for the Intercooler.
The detail matches the rear frame rails.

Power Steering Reservoir Mounted

 

[H-TOWN-TYPHOON]

Re: Sonoma GT 0334 - Build Pics

These updates never fail to impress. :tup:

 

[JuStBlAzIN]

Re: Sonoma GT 0334 - Build Pics

So what happend..No more SEMA?

 

[JSM]

Re: Sonoma GT 0334 - Build Pics

Do you have a part # for the AC core? It looks like it would be a good fit on my truck when I get AC working.

Again Marty, nice job. Did you finally get info Adam was looking for the other night. Took a few phone calls but I got close.

 

[TxSy1430]

Re: Sonoma GT 0334 - Build Pics

just one observation on pics 4 and 6. the rad core support looks like its rubbing on the radiator. Is there a rubber grommet that should go in there?

Anyway...it looks bad ass!!

 

[Syclone#1992]

Re: Sonoma GT 0334 - Build Pics

Radiator Cover

Are the holes in the cover to hold the beer can while people view the detail at SyTy Meets.

 

[turrrbo6]

Re: Sonoma GT 0334 - Build Pics

Are the holes in the cover to hold the beer can while people view the detail at SyTy Meets.

looks like it holds a 6 pack, good call !

 

[Syborg Twin Turbo]

Re: Sonoma GT 0334 - Build Pics

Do you have a part # for the AC core? It looks like it would be a good fit on my truck when I get AC working.

Arizona Mobile Air Inc.
800.648.4475

AC Condensor 10 1/2 x 26

Again Marty, nice job. Did you finally get info Adam was looking for the other night. Took a few phone calls but I got close.

Yep, we were able to figure it - thanks again for all of your help

 

[SEL777]

Re: Sonoma GT 0334 - Build Pics

Marty, nice to see your Syborg in my latest issuse of Hot Rod. The pics were OLD as it was still in black. Very cool to see something I've been following from the start make it to a publication that millions read. I still cannot wait to see this in person.

 

[Syborg Twin Turbo]

Re: Sonoma GT 0334 - Build Pics

Good Afternoon All,

I figured since it was a rainy day and I'm stuck at work I would post a quick update.
Couple shots of the engine compartment with everything mocked up.

 

[phoonTy]

Re: Sonoma GT 0334 - Build Pics

I <3 Syborg TT :drool:

Marty, do you have any sort of time line figured out for a completion date? I know if I was in your position, I wouldn't be able to stand it with it being so close to finished, yet so far away.

 

[MRKING]

Re: Sonoma GT 0334 - Build Pics

whats up with the zipties marty ? only temp i assume??

 

[Merk]

Re: Sonoma GT 0334 - Build Pics

whats up with the zipties marty ? only temp i assume??

they do make aluminum zip ties as well

 

[Syborg Twin Turbo]

Re: Sonoma GT 0334 - Build Pics

Right now Kenny and everyone involved is working as much as they can. Our goal is to finish the truck and get to Tracy at the Recovery Room Interiors. We / I have made a couple changes under the hood that may slow things down a little but I don't want to sacrafice the finished project just to make a date.

I <3 Syborg TT :drool:

Marty, do you have any sort of time line figured out for a completion date? I know if I was in your position, I wouldn't be able to stand it with it being so close to finished, yet so far away.

 

[Syborg Twin Turbo]

Re: Sonoma GT 0334 - Build Pics

whats up with the zipties marty ? only temp i assume??

yep, those were only temp. I ordered those really nice Billet line clamos from Billet Specialties.

ps - if we end up using any zip ties they will be stainless steel.

 

[bezerk]

Re: Sonoma GT 0334 - Build Pics

well...i like zipties when put on right

 

[Syborg Twin Turbo]

Re: Sonoma GT 0334 - Build Pics

Good Evening All,

I know it's late and I should have posted this earlier but the site was down so I moved on to the next project.

A couple quick pics of the chassis Details.
The one-off set of brake made by www.revolutionbrake.com
These guy's were awesome to work with.

The Air Ride Set up getting ready to get plumbed.

Side Shoot of the back half.

Close up of the transition from the stock frame to the tube chassis.
Thanks to my Buddy Rick who sketched this out early on in the project.

And ...
The best picture of the day.
Now your going to have to look closely as the picture was taken by Kenny.

Yep, that's a golf cart in Kenny's office.
Actually it's a golf cart that Kenny drove through his office wall.
Seems his foot got stuck on the gas pedal.

 

[JSM]

Re: Sonoma GT 0334 - Build Pics

The gold cart reminds me of this tv show about building motorcycles. You sure he did it on accident and not after another phone call from his best friend named marty saying "Kenny, I have an idea but it will require a few changes. What do you think about extended cab?"

 

[Syborg Twin Turbo]

Re: Sonoma GT 0334 - Build Pics

The gold cart reminds me of this tv show about building motorcycles. You sure he did it on accident and not after another phone call from his best friend named marty saying "Kenny, I have an idea but it will require a few changes. What do you think about extended cab?"

anything is possible.

 

[Syclone#1992]

Re: Sonoma GT 0334 - Build Pics

Any updates?