Search results

What do you need to know? Build it as good as you can afford basically. Its pretty simple. Stock block filled with block fill to mid frost plug, 4 bolt billet mains, scat cryoed crank, eagle rods, diamond pistons , vortec heads (or brodix if you really want to go fast) billet 67 turbo. Oh and a...

Re: Built 4L80e forsale Hey guys, got texted last night after posting this by a local that he will take the tranny. If does not go though I will get on contact with the guys that PMed me. Nolan

Built 4L80E forsale. Brand new never used. All hard parts of tranny have been cryo treated. Billet input shat with billet forward hub. Alto clutch packs in 1-3 with blues in the OD pack Transgo HD2 kit B & M deep cast pan. Only selling because I want to road race/autocross and I am looking to...

Re: LS7 Indy Syclone I changed the reluctor wheel to a 24 tooth one. I used these ones on the rad support. http://www.allstarperformance.com/product.htm?prod=1001&part=ALL11070&add=no Just drill a hole and start turning the bolt. They work awesome. Nolan

Re: LS7 Indy Syclone Made some more progress. It goes slow 2 hours a night after the kids go to bed but I am chipping away at it if I do not fall asleep after reading Berenstain Bears.. Headers are in, oil lines, power steering lines, engine wiring. Tomarrow the tranny and tcase are going in...

Re: LS7 Indy Syclone This will have to due for now. http://s266.photobucket.com/albums/ii254/10secTy/?action=view&current=MVI_1585.mp4

Re: LS7 Indy Syclone I might just take you up on this.:tup: nolan

Re: LS7 Indy Syclone Compared to the twin turbo V6 it is Big time. Nolan

Re: LS7 Indy Syclone Engine oil and PS fluid. Nolan

Re: LS7 Indy Syclone Paralle 4 link with a wishbone locator. This way when I am road racing I run them paralle then when go drag racing move the top bars and wish bone for the IC I want. I have a Bell tech large Typhoon rear sway bar and will be putting a typhoon gas tank at the rear where the...

Re: LS7 Indy Syclone Should be good for now. Its kind of a budget build. If I get board and want to run some fast times at our track rentals I will put a 200 shot on it. nolan

Re: LS7 Indy Syclone Race Proven Motors oil pan. Nolan

Re: LS7 Indy Syclone Trans cooler, 45000BTU's need to keep the tranny cool when road racing. nolan

Just putting a quick post up of my project. I will not be updating it a ton as any spare time I have will be in the garage working on the truck. I will be uploading pics on Photorbucket here.http://s266.photobucket.com/albums/ii254/10secTy/LS7%20Indy%20Syclone/ The build is as follows. LS7 out...

Re: Dyno tuning the truck! Funny I Dyno Sy/ty's all the time on our Mustang dyno with no issues. Nolan

Re: excessive KR @ 3600rpms over 70mph You still need to put a real fuel presure gauge on the truck and veryify that the fuel pressure goes up to 75psi when your boost goes to 15psi. Your truck is not leaning out at 10psi so how will checking the fuel pressure at 10psi show the pump is fine...

Re: SY1107- Long time lurker Intro 160lbs are very nasty to tune and the short PW is a bitch. 120's are much nicer and with a batch fire system 160's would be a nightmare. I have tuned the new 225lbs compared to the 160lbs and the 225lbs idled better on gas in a V6. Nolan

Re: First Test & Tune of 2011 nets a 10.95 Congrats!!! Len it has been a long road but its starting to work out now. The 120lbs injectors are on the way. I think you will be the first guy in syty land to run 120's with the stock ECM. Nolan

Re: what is the best Wideband O2 sensor Its a NTK but not the same one used by the AFX unit.. Nolan

Re: what is the best Wideband O2 sensor If you are on a budget get the NGK AFX with the NTK sensor. If you have more money they get a AFM1000 from ECM that is what the big 3 use. I use a AFM1000 when tuning on the dyno. Nolan