Search results

yea i just got a 20g with a 14cm exhaust housing. enfortuntatly i was just searching around and found that the stock tc doesnt work good with the 14cm exhaust housing. my question was even at sea level with an external gate is this still true? thanks -Matt

which wire on the tps do i need to tap into for tps voltage?? thanks

cool thanks. now i just need to find which wire i need on the tps.

First, which wire on the throttle position sensor gives out the voltage reading? Second, the white wire (fuel pump relay wire) that runs over the top of the brake booster. is it ok to tap things that need to have a ignition on/off to this, ie. guages, nitrous switches...? thanks

anyone on this one??

yea i have it piggybacked correctly. even with the key to the on position with the truck not running the led is on. what should i check that i might have done wrong? thanks

i have a scan tool and its not showing im getting any knock. thats why i was wondering why the led was lit up on the ultimate??

put my ultimate guage style 50#injector chip in and it runs good. my little red light that is in the middle of the guage stays on all the time. i thought this was supposed to signal kr? using my scanner it says i am not getting any kr? also what is a good fuel pressure to start at with...

20 here 21 in march :new-bday: :drinking: :drinking:

possibly from a "dry" kit this might be a good idea. but the nx kit runs a mixture of nitrous and fuel.

was thinking of going 2 ways, #1 off the schrader valve at the end of the fuel rail #2 run a really small seperate tank w/105 octane in it, and a small little fuel pump.

ill show you that a nx wet kit works with a ty. and the nozzle isnt "that" big. even though you guys dont like nitrous do you think the nozzle would work better before or after the intercooler? thanks

ya right... no its going on my ty. i figured the best way to go nitrous was with a wet kit. so here i go. :)

at least :drinking:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=33740&item=2432451695 8)

?? Thanks

installed the minigate today. just running a vac line from the turbo to the fitting on the side of the minigate. when i go wot i get about 12-13 psi. is this what i should be seing as base boost or is something not right? Thanks

alright ill give replacing the msd coil with a stocker. and ill see how it goes. is there a way with a volt ohm meter to check my plug wires to check if the are ok?

STILL trying to get my ignition stuff all correct. heres what i got so far, ngk ur5's, atr black beauty plug wires, brand new msd distrubutor, new msd coil. at idle the truck has a weird poping noise that almost sounds like a miss. the "poping" noise isnt consistant. then sometimes above...

my front end bump stops are shot due to the front of the truck being to low. i need to get some new polyurethane bump stops that are real small. anyone have a part number for em? thanks