Search results

Where are you guys getting replacement wastegate actuators?

Hate to ask this but search turns up a bazillion unrelated articles. Taking off the stock turbo from the manifold. Heated the stud and manifold, hit it with oil first nut came off. 2nd one, the stud came out. The two toward the front of the engine. Now, none of these will let a socket sit down...

This thing does NOT want to go in the truck. First I took the center support for the stock intercooler off. It won't remotely fit with that on there. Went to slide it on....won't go over the 3 studs.....drilled it to the next size up....goes a little further and then hangs up. Went to file the...

I have an old ATR stainless cat back system for a Typhoon. Trying to find a test pipe to replace the cat until I can afford to get a 3" cat converter. My exhaust has a necked down area right after the converter that blends into the first downward bend. Did ATR make a test pipe? Is there a...

Welp crap. I've got the "ram chargers type" dual fans with shroud. They melted a temp controller. Replaced that with a 75 amp relay off of a Freightliner and ran a 10 gauge wire with a fuse holder in it. 30 amp fuse......Melted the housing off the fuse holder and the rubber that holds the fuse...

My A/C died today. Compressor tried to seize, sounded like a jar of marbles and smoke came out from under the hood. Bye bye A/C. I spent $550 7 years ago and replaced everything. Now it's dead again. Motormite A/C delete pulley and bracket: Autozone#34152 Gatorback stock HD belt 4060955

I'm gonna do a GP purchase of 10 on the installation kits. I will no longer ship internationally. This GP will run for 6 weeks. July 28 to September 7th or until 10 kits are sold. Normal price $1573.25 for the complete changeover kit. GP price $1320.00 Kits are in Kit form only! Linkage...

This started here: http://www.syty.net/forums/showthread.php?t=50299 But seems better suited in the body forum. I ran a garden hose on the firewall. Water came in as a trickle on the inside in 4 places. Trickle from the edge of the fuse box. Trickle from a line coming through the firewall up...

I'm donating a 700r4 with stock style 2300 to 2500 rpm stall converter this year. I just need to get mine pulled so I can get my 80e in and get my 700 done for nationals. I'd like to get it done so whoever wins it, walks away with it. Maybe get a few more people interested in going:tup:

Weird thing happened. Using A/C. Worked great. Dillon and I drove about 300 miles. Hottest day of the year. Last leg of the trip going to Dayton. Air gets friggen COLD. Drive it back home. Still friggen cold. Colder than normal. Engine temps go about 30 degrees over normal. Get home, open the...

Tried to search this and everything with "corvette" in it showed up.:roll: Here's what I have: Corvette 90's vintage sawblade rims. 8.5"X17 fronts 9.5"X17 rears We need circumference as close as possible. Here's best I could find: 255/45/17 front 285/40/17 rear...

A guy came to Homecoming at the track claiming he was Kelly Dyer and picked up a propshaft Kelly had purchased. Kelly lived in Michigan so I didn't think anything of it. This morning, I get an email from Kelly asking when I was gonna ship his propshaft. If anyone knows Kelly Dyer and can...

I wanted to do a GP on these. Normal price is $413 + shipping. If I can get 10 orders in I can do them for $375 shipped in the lower 48. These will include a new shift lever to clear the prop shaft since it's so much bigger than the stock unit. I'll leave this open till the 21st of June. If you...

I'd like to thank these two guys. Joe Shookla for $145.35 and Branden Eldred for $339.55 for a total of $484.90. Joe got a PG HD shifter cable and Branden got a new Gilbert Propshaft with hardware for installation and the thier monies went to Lisa. And I also appreciate those that have donated...

Do this just like the other one. Donating proceeds from a HD shifter cable for syty/sonoma GT to Lisa Welch. Shipping included in the lower 48. First $150 get's it. Send the money to Mike Renz and put "PG shifter cable for...

Donating proceeds from a 700r4 length Gilbert prop with all hardware and seal. Shipping included in the lower 48. First $350 get's it. Send the money to Mike Renz and put "PG Gilbert for Myclone" in the subject. As soon as he gives me confirmation of received funds, I will send the prop to the...

Donating proceeds from a 700r4 length Gilbert prop with all hardware and seal. Shipping included in the lower 48. First $350 get's it. Send the money to Mike Renz and put "PG Gilbert for Myclone" in the subject. As soon as he gives me confirmation of received funds, I will send the prop to the...

http://www.syty.net/forums/showthread.php?t=47450

I'm considering putting racing seats in the front but also have matching seats in the rear of the Ty. Has anyone already done this? I'd like to keep using the stock hardware for seatbelts but have the comfort of reclining racing seats in the back. I've never had more than 4 people in there...

I finally have all this worked out. Mods please move as appropriate. Paypal cblake3@cinci.rr.com Check George Blake 4405 Karen Drive Middletown, Ohio 45042 Myclone T-shirt with smiley---------------$18 Any size up to 3XL. Gray with black print. The shirt will have the logo I drew up...