Mr Syclone Updates for 2009

[hatrik8]

Re: Mr Syclone Updates for 2009

Syclone is at a BIG car Show this week =)

Sweet. I needed a new desktop background. :tup: Is the door lock scrached up? It almost looks like it in the third picture.

 

[Nova67ss]

Re: Mr Syclone Updates for 2009

I sure hope your not running those tires and rims @ the race track. THose tire are not helping with any traction since the sidewall is so stiff. Must be a set of show rims and tires.

If you are running them it will be interesting to watch.

ViciousV6

No this is the street and show rims, on track its slicks in rear and same type of tire rims up front like last year ( first fresch tire combo sinse -07) and this time we go SLICKS at rear..

 

[Nova67ss]

Re: Mr Syclone Updates for 2009

No it aint scratches its refections of the light tubes up in the roof thats winsible in lock aeria..

Mirror finish

 

[Nova67ss]

Re: Mr Syclone Updates for 2009

Sorry still no fan what so ever of that wing looking thing on the back, truck would looks AWSOME without it....

Some swedes asked "How long time does it take to get rid of wing?"

Wing sitts on a special consol and with 4 wingnuts its removably in about 20 sec time so as usual IF it does´nt work Its gone faster than 60 seconds

 

[Seti]

Re: Mr Syclone Updates for 2009

I guess I'm in the minority about the wing. It doesn't bother me a bit. The rims suit it well and the ride height is spot on. The paint looks like you could dive into it. We'll just throw out the fact that it's the fastest one around. LOL!!

That truck is flame thrower hot as far as I'm concerned. :tup:

S.

 

[1madgumby]

Re: Mr Syclone Updates for 2009

If the whole wing thing does not work & I know it won't because of so much drag, will you post A vid of someone smaching it?

 

[LIL QIK]

Re: Mr Syclone Updates for 2009

I guess I'm in the minority about the wing. It doesn't bother me a bit. The rims suit it well and the ride height is spot on. The paint looks like you could dive into it. We'll just throw out the fact that it's the fastest one around. LOL!!

That truck is flame thrower hot as far as I'm concerned. :tup:

S.

I'm in the minority as well. Knowing what the truck is...I don't have a problem with the wing at all. It could be a lot worse with the selection of wings out there. I think the package as a whole looks pretty good.

 

[Nova67ss]

Re: Mr Syclone Updates for 2009

I'm in the minority as well. Knowing what the truck is...I don't have a problem with the wing at all. It could be a lot worse with the selection of wings out there. I think the package as a whole looks pretty good.

My opinion to. thanks.

 

[sy#2921]

Re: Mr Syclone Updates for 2009

Anyway I could get the ride height measurement of the truck as it sits in these pics? From the ground to the bottom of the cladding on the wheel arches.

 

[mrsyclone]

Re: Mr Syclone Updates for 2009

I made a little film about the updates of 2009. I made the film at the carshow.

Thanks for looking





http://www.youtube.com/watch?v=R1KmCJq0S6Y



Robert

 

[JSM]

Re: Mr Syclone Updates for 2009

Robert your setting the bar so high, even you won't be able to go over it.

Truck is looking VERY nice, not only fast but everything is done to such A1 quality.

 

[1madgumby]

Re: Mr Syclone Updates for 2009

Vary bad ass. No wing coment. Does look BAD ASS !! Good job. hope to see it in the states soon.

 

[mrsyclone]

Re: Mr Syclone Updates for 2009

I got totally supriced today when I won 1st price (in category: New performance car pro) at a big carshow here in Sweden. It has been a 4 day carshow. I´m very proud to put our stormtrucks on the map/magaiznes again.

Thanks a lot













Robert

 

[jasonpickett]

Re: Mr Syclone Updates for 2009

Congradulations You deserve it.

 

[V6QUICK]

Re: Mr Syclone Updates for 2009

Congratulations Robert. Your truck looks great. Now lets see some 8.50's!!!!!!!!!!!!

 

[1madgumby]

Re: Mr Syclone Updates for 2009

good job Rob !!!!!

 

[Nova67ss]

Re: Mr Syclone Updates for 2009

The first of a serie of testdrives is done, to secure the performance of engine,trans and chassie to perform at its best on race in Gardemoen Norway soon..

Robert is realy pleased with the performance and poweroutput allready and this is with weeery low boost 13 psi at the most its like driving a normal car at speed 35 or less, its soft going straight as an arrow again realy puting power to the ground and no hazzel at all.

For the first time Bad A$$ realy works without some disturbance,its gona go fast..

 

[1madgumby]

Re: Mr Syclone Updates for 2009

What engine Mang. system you using?

 

[Nova67ss]

Re: Mr Syclone Updates for 2009

Fast XFI..

AND everything U ever gona want to and be alowed to know about this Syclone is printed down here..

http://www.syty.net/forums/showthread.php?t=62285

 

[1madgumby]

Re: Mr Syclone Updates for 2009

I have the old fast speedpro on mine. I love it.