Search results

Looking for either a complete from A Arm kit w coilover or just the correct coilovers with stock A Arms. I am running a ls motor single turbo which is probably heavier than the stock sy motor although I have aluminum heads. Shoot me a PM if you have a set for sale. Thanks!

Re: LS Swap Syclone Single Turbo Build Trying to resize more photos..

Re: LS Swap Syclone Single Turbo Build Uploaded with ImageShack.us Did a little more work on pass side header today.

Re: LS Swap Syclone Single Turbo Build I would think a 4L80 would be ok. Edit - the 4L80E I am doing is being upgraded with parts from Jakes Performance including trans brake by a friend.

Re: LS Swap Syclone Single Turbo Build The only real good points about the swap are the turbotime oil pan and I can use all the ls brackets that were on the engine for the accessories. The truck had no A/C and won't for this build either as a 94mm deal is just huge and getting everything to...

Re: LS Swap Syclone Single Turbo Build This is the beginning of the pass side header: Uploaded with ImageShack.us

Hello, I have been on the forum for a long time and have owned a fairly stock sy for a while. I have been fairly involved in the LS scene for a long time, and was presented with an opportunity to purchase a syclone with an ls swap this summer. Its a 47k mile body, but the work done was pretty...

Re: f/s Kenne Bell charge pipe How much

Re: Transbrake discussion 4l80e Yes his brake. Works in both first and second which is nice.

Doing a large single turbo ls swap into a sy. Started tabbing headers and such and my trans builder is doing a 4l80e with a brake for me. This is a 94mm turbo deal. Aside from the rear, is there any companies that offer upgrades for the front shafts, transfer case, and front diff? Anybody care...

Re: Tubular 2wd control arms Looks like a great find!

Re: Tubular 2wd control arms Any updates on install?

Re: got started on my rack and pinion conversion(pics)long I wonder if this would enable a truck manifold to be used on the drivers side since it normally his the steering box.

Re: Purchased LS swapped syclone. Advice needed. I'll look into it and get back with you. Thanks.

Re: Purchased LS swapped syclone. Advice needed. Basics are ok. Well, almost. Radiator is pretty well unsecured l. Will most likely strip the truck down and start over.

Re: Purchased LS swapped syclone. Advice needed. Truck is pretty cut up and I don't have a desire to put a V6 in it. I have lots of extra LS stuff laying around.

Re: Purchased LS swapped syclone. Advice needed. Wiring is a MESS. Crimp connectors all over, fuse blocks look like they came from track auto all over the place. Truck has stalled because the fuel pump connector literally fell off driving down the street. Exhaust system looked like it was...

Re: Purchased LS swapped syclone. Advice needed. Also, if you run awd, what tire setup are you using for a radical street strip deal? Thanks.

Hello, I have owned a relatively stock syclone for years, and just picked up a 47k mile syclone with an ls swap. I run a GMC dealership, so I thought it would be neat to build a wild turbo syclone. Digging into it has revealed it needs to be completely redone. I even thought about selling it...

I recently purchased a syclone with an ls1 swap. Plans are to swap to a 4L80E, 402 iron block, 88mm single. My question is this - I would possibly want to do a 4x4 transfer case so I can switch to 2wd to do a burnout at the track. Anybody have any experience with this?