Search results

Re: Somewhat out of place The original poster has 3 posts from 7 years ago. Doubtful he's reading this....or that he still has that truck. This thread was brought back from the dead by The_Butcher, who probably should have started a build post.

Re: Oil filter sandwich adapter Not sure if we did a write-up or not. We started it back on the old mailing list and the board was launched while we were doing this. Not sure we made the effort to record that data here. Edit - Search shows nada. Lemme look through some old hard drives and...

Re: Oil filter sandwich adapter FWIW, you can run a tee underneath the existing elbow for the oil pressure sender that will allow you to add in an extra (aftermarket) sending unit. Oil temp is a far less useful reading for us than oil pressure, so I could only justify (personally) adding an...

Re: Carlisle Truck Nats Galleries added. http://www.sytyevents.com/gallery/

Re: Carlisle Truck Nats Ignore any reference to payment from the site, guys. Some of that is residual code applicable to paid events. Tom will chime in and let you guys know how payment will be handled as it will not be handled through the sytyevents site for this particular event. Those who...

Re: Post your build specs No numbers on current (autox) build but here was my last build: - Stock block, crank, and rods - 412 cam - L35s - unported with 2.02/1.60 valves - 60# injectors - 60-1 PTE turbo kit with 3" DP (no exhaust) - 3k stall 9/11 converter - Walbro, AFPR, etc... - Large upper...

Re: SyTy EPROM Differences Seeing the changes is neat as it gives you some indirect insight into the OE tuning process and thought.

Re: Pitbull chip Replied.

Re: Syclone embroidery Any embroidery shop can do it. Prior to having the leather installed on the seat frame/foam, have an embroidery shop stitch the logo into the headrest. Here's the logo you'll need (in eps that any embroidery shop can port to their machine's format)...

I often get customers calling/PM'ing and asking about the differences between the GM factory EPROMs and the revisions. So, instead of responding to each individual one, I decided to outline the differences in a post. I realized that I had actually written this up a few years ago, but it was...

Re: Pitbull chip Anyone who wants an ATR chip, send me your stocker and I'll reprogram it for $25.

Re: Parts for sale Ditto.

Re: ebay aldl cable Nope....but have bought plenty of these and they work flawlessly - http://www.aldlcable.com/

Re: Shindig 2014 Info Just got confirmation from the SCCA and the Georgia Ports Authority that we are good to go and they have us locked in for Saturday, October 4th!

Re: Parts for sale How much for a grille?

Re: aldl cable help I also host the entire driver CD that ships with the ALDL cable right here - http://www.hoodtuned.com/public/ALDL_Drivers.zip

Re: Goodyear belt Without knowing the required belt length, grab a piece of rope (at least 96" long) and route it like the belt. Emulate the tensioned belt path across the tensioner and mark where the two ends meet. Now measure overall length. You should be awfully close to the desired belt...

Re: Engine Gaskets/Orings Yes. http://www.hoodtuned.com/store/index.php?route=product/product&path=20_40_44&product_id=109

Re: First person to use Vortec heads? Waller was also 2000 IIIRC.

Re: Rpm stage 1 turbo That's a loaded question. What's the budget? What's the demands for a boost controller? You could "get by" with a $15 eBay mechanical bleeder screw, but you might prefer a $500+ Greddy Profec OLED.