Search results

Re: Help! Lack of power. The Bronze, thanks for the quick response. I did find a vacuum leak in the elbow of the air intake elbow that feeds a vacuum line to the throttle body. Fixed that, but you can still smell a lot of unburnt gas coming out of the exhaust. I think the plugs might be...

Re: Help! Lack of power. I'm pretty sure it's a 2bar map sensor, and the truck came with a pitbull chip when I bought it.

Re: Help! Lack of power. Ok, here's a link to a new file I just captured. http://www.mediafire.com/?sstpuyi171t9d7l Thanks

Re: Help! Lack of power. Actually I just started it up to check it out this morning before work, drove my company car to work. Just checked the flex hoses and the turbo and all seems fine. No chunks missing from the impeller and no play in the shaft. Ran datamaster on it and here's the...

Re: Help! Lack of power. Started it up this morning and now it runs rough at idle too. When I rev the motor the fuel pressure gauge rises to 46 and stays steady, even while the motor stutters. Seems to be running worse today than yesterday. Didn't have a chance to run datamaster in it before...

Re: Help! Lack of power. Sorry I forgot to mention in my original post, I have a boost gauge and when I rev the motor, it doesn't go past 0. At idle it is at -15.

Re: Help! Lack of power. It idles fine. I don't have the stock air filter crossover tube. I'll try and get some data scan later today, have to get my laptop back from a friend who is borrowing it.

Re: Help! Lack of power. Less than 3000 miles ago I changed the distributor, cap, rotor, coil, wires, plugs, idle air control valve, egr, fuel pressure regulator, and intercooler pump. Also replaced all the vacuum lines with silicone lines.

Re: Help! Lack of power. Yes.

So I took my Syclone out for a drive today and noticed that it was running a little sluggish. Idled fine, but just didn't have any power when I hit the gas. Also noticed that when I let off the gas, there was no noise from the boost going through the waste gate. When I floored it, the boost...

Re: 808 cruise / meet & greet - 10/11/10 I'm up for whatever.

Re: Syclone spotted in Atlas Insurance building in Hawaii I'd be up for that.

Saw a nice Syclone with black rims in the Atlas Insurance building on King Street. It looked to be in great shape.

Re: brake upgrade parts PM sent on steering knuckles and steel brackets.

Re: Black Syclone in Hawaii Hmm. Mine doesn't have stock rims anymore. I installed some c5 thin spoke polished rims on mine. I wonder who that was.

Re: Black Syclone in Hawaii Wasn't me. Maybe it was V. Did the truck have black rims?

Re: Typhoon died on me, won't start... My syclone did something similar earlier this year and it turned out that my coil went bad.

Re: Intercooler blanket Count me in if this happens.

Looking for a Belltech front sway bar for my Syclone. Let me know what you guys have and how much shipped to Hawaii.

Re: Parts for sale- garage sale How much for the headlights shipped to Hawaii? Should fit in a flat rate priority mail box.