Turbo Blankets: update SYTY PROTOTYPE PICS
- Thread starter 93ty475
- Start date
SYCLONE-2234
New member
Turbo Blanket
Turbo Blanket
I know this is my first post but you can count me in for a #1 & #3
Even though the BLK BTCH is in the shelter for the winter and I'm stuck in Korea for 7 more months :evil:
Turbo Blanket
I know this is my first post but you can count me in for a #1 & #3
Even though the BLK BTCH is in the shelter for the winter and I'm stuck in Korea for 7 more months :evil:
SYCLONE-2234
New member
Turbo Blanket
Turbo Blanket
Just let me know when they are ready. Ya better just try to e-mail me, calling Korea is a little bit spendy
Turbo Blanket
Just let me know when they are ready. Ya better just try to e-mail me, calling Korea is a little bit spendy
93 TY 2185
Donating Member
Vaders Sy said:
TTT
ghettosled
SYTY SUPERSTORE
Update 1/31/04:
Wow, looks like we have more then doubled our interest since I last viewed the thread. I think we can definately negotiate a fair price now. Let me check up with them and see where we stand. I think some of the prototyping has gone on but they still need a pte setup (i think) which i will bring down on monday.
Mike Arnold (stock turbo/ic blanket)
Steve Chiapparine (stock turbo/ic blanket)
Wade Segrest (stock turbo/ic blanket)
AXXE (PTE turbo/ic blanket) X2
Doug Rodriguez (stock turbo/ic blanket)
Servando De La Garza (PTE turbo/ic blanket)
Servando De La Garza (stock turbo/ic blanket)
Boostedpimp (stock turbo/ic blanket)
Mario65 (stock turbo/ic blanket)
Skata (stock ic, pte turbo)
Bill C (pte turbo)
Gabe Estrada (stock turbo, stock intercooler)
VinPecora (stock turbo)
dgoodhue (stock turbo, stock intercooler)
SYCLONE-2234 (stock turbo, stock intercooler)
jetdrvr (pte turbo)
Hector (PTE turbo)
Sam Landa (stock turbo/stock intercooler)
Maxtor (PTE turbo)
92Ty#1524 (stock turbo)
Patrick Johnson (pte turbo)
Vaders Sy (pte turbo)
kwick6 (PTE and stock intercooler)
VinPecora (stock turbo/intercooler)
Jay Westburg (stock turbo/intercooler)
Wow, looks like we have more then doubled our interest since I last viewed the thread. I think we can definately negotiate a fair price now. Let me check up with them and see where we stand. I think some of the prototyping has gone on but they still need a pte setup (i think) which i will bring down on monday.
Mike Arnold (stock turbo/ic blanket)
Steve Chiapparine (stock turbo/ic blanket)
Wade Segrest (stock turbo/ic blanket)
AXXE (PTE turbo/ic blanket) X2
Doug Rodriguez (stock turbo/ic blanket)
Servando De La Garza (PTE turbo/ic blanket)
Servando De La Garza (stock turbo/ic blanket)
Boostedpimp (stock turbo/ic blanket)
Mario65 (stock turbo/ic blanket)
Skata (stock ic, pte turbo)
Bill C (pte turbo)
Gabe Estrada (stock turbo, stock intercooler)
VinPecora (stock turbo)
dgoodhue (stock turbo, stock intercooler)
SYCLONE-2234 (stock turbo, stock intercooler)
jetdrvr (pte turbo)
Hector (PTE turbo)
Sam Landa (stock turbo/stock intercooler)
Maxtor (PTE turbo)
92Ty#1524 (stock turbo)
Patrick Johnson (pte turbo)
Vaders Sy (pte turbo)
kwick6 (PTE and stock intercooler)
VinPecora (stock turbo/intercooler)
Jay Westburg (stock turbo/intercooler)
I made a IC blanket for my sy years ago & love it. Iv'e been making blankets for my I.C. Chiller & the related res. tanks used with it's kits for a while now. U can get a idea of what they look like @ decolabs.com I've been thinking about mass producing syty IC blankets for a while, but for some reason I didn't thing there'd be much intrest. Seems like I was wrong. The material I use for these was selected after testing many different types. I found others that were somewhat more affective but way more expensive. Based on what it cost to make the ones I've been doing, I might guess the syty 1s would be around $75.
I guess there is still no $$$ (or temp reduction) figures from the place mentioned earler? I can check again, but mine are reducing temps (as I recall) over 100f. This is real important to me cause with my chiller I'm trying to keep temps below 50f.
Are u guys planning on keeping the lower IC brackets ? The 1s that connected to the exhst. man.? I removed mine cause....... talk about a hot IC, that sure helps. I made some modified insulating brackets
to replace them & then found out I don't need any, even better. 8)
Based on the fact that lots of turbos have insulation on them I guess it doesn't hurt them , but I'd rather let the thing breeth instead of keeping all that heat in there. I made some loose fitting heat sheilds for mine out of some laminated alum. This sheilds the IC & other parts from the direct turbo heat but still lets it breeth.
I guess there is still no $$$ (or temp reduction) figures from the place mentioned earler? I can check again, but mine are reducing temps (as I recall) over 100f. This is real important to me cause with my chiller I'm trying to keep temps below 50f.
Are u guys planning on keeping the lower IC brackets ? The 1s that connected to the exhst. man.? I removed mine cause....... talk about a hot IC, that sure helps. I made some modified insulating brackets
to replace them & then found out I don't need any, even better. 8)
Based on the fact that lots of turbos have insulation on them I guess it doesn't hurt them , but I'd rather let the thing breeth instead of keeping all that heat in there. I made some loose fitting heat sheilds for mine out of some laminated alum. This sheilds the IC & other parts from the direct turbo heat but still lets it breeth.
