Search results

does the ultimate 50# chip stay in open loop? i would think that the benefits of using the other sensors on the truck to change fueling would be a plus in closed loop.

i have a 20g/14cm and was wondering what kinda performance gain a 911 tc would give me with the large exhaust housing? i have a stock tc right now. thanks

Is there any reason why my truck should feel like it excellerates faster in overdrive than drive?? I have an ultimate 50# chip, and was wondering if this maybe had something to do with tc lockup points and what not. thanks.

first time at the track, 16psi- 13.7@101mph. with a shitty 2.3 60ft time. this is with 20g 14cm turbo, tons of ic mods, nitrous express wet kit with 75 shot. i had very little detonation but i really need to work on tuning and learning how to race at the track. its a different animal from...

yea i just got a 20g with a 14cm exhaust housing. enfortuntatly i was just searching around and found that the stock tc doesnt work good with the 14cm exhaust housing. my question was even at sea level with an external gate is this still true? thanks -Matt

which wire on the tps do i need to tap into for tps voltage?? thanks

First, which wire on the throttle position sensor gives out the voltage reading? Second, the white wire (fuel pump relay wire) that runs over the top of the brake booster. is it ok to tap things that need to have a ignition on/off to this, ie. guages, nitrous switches...? thanks

put my ultimate guage style 50#injector chip in and it runs good. my little red light that is in the middle of the guage stays on all the time. i thought this was supposed to signal kr? using my scanner it says i am not getting any kr? also what is a good fuel pressure to start at with...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=33740&item=2432451695 8)

?? Thanks

installed the minigate today. just running a vac line from the turbo to the fitting on the side of the minigate. when i go wot i get about 12-13 psi. is this what i should be seing as base boost or is something not right? Thanks

STILL trying to get my ignition stuff all correct. heres what i got so far, ngk ur5's, atr black beauty plug wires, brand new msd distrubutor, new msd coil. at idle the truck has a weird poping noise that almost sounds like a miss. the "poping" noise isnt consistant. then sometimes above...

my front end bump stops are shot due to the front of the truck being to low. i need to get some new polyurethane bump stops that are real small. anyone have a part number for em? thanks

could i expect with this combo. new motor with keith black pistons, ported intake, water injection, open down pipe, ITS mini gate running at 18psi, stock turbo, atr upper ic, griffing lower ic, all 3/4 heater hose, jabsco ic pump, 50# injectors with ultimate, walbro 255. remember just some...

ordered an its mini gate from mike lee yesterday. i have seen on the boards here that the externals are "loud". was just wondering if the external wastegate sounded more like a blow off valve, or like open exhaust, or ......... im running an open down pipe right now so i cant imagine what...

looking to get those HAL Q1 10 way adjustable shocks i have seen ppl on here talking about. they need to be for a ty that is lowered 2 inches in the back with blocks. (i was told i need shorter shocks if i had lowering blocks. so i guess i need a part number and where i can get them from...

how many turns of preload do i need to turn the nuts on the rocker arms during a valve adjust?

i used the simple diagram from the aquamist website to hook up a little led so i know when the aquamist turns on. but doesnt work. just used and led i bought from kragen, has one postive and a ground terminal from the back to light up. checked it off the battery and the light works. with...

for 2 weeks i have had the problem of my truck cutting out and loosing all boost above 40% throttle. i replaced my ecm, and memcal which is what i thought was broken but it didnt help. i noticed today that when my problem occours i can hear what sounds to be air rushing by something on the...

if i wanted to put a 125 shot of nitrous on my ty would it work if i was getting my car dyno tuned for it? im getting and external gate soon and im getting some dyno tuning done so i was wondering if it was worth it, or should i just stick with my aquamist kit i have on now and run alot of...