RazzSyclone. Built By a Chick.

TYTILIDIE

TYTILIDIE

METH HEAD
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

ziembic said:
do you have pictures of the aluminum inner fenders? This sounds like a good idea.
Click to expand...

They are super easy to make. Simply remove your fender and trace the shape on to a piece of sheet metal and cut it out.

Mandi, are you doing all of this yourself?
 
95xtreme

95xtreme

New member
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

Would you be interested in selling the a/c stuff at all? Pm me if so, looks good I much rather work out side then in a garage anyway...except for this time of year here in fargo. lol
 
MRS HARMON

MRS HARMON

New member
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

ziembic said:
do you have pictures of the aluminum inner fenders? This sounds like a good idea.
Click to expand...
Harmon made them himself also
006-23.jpg


TYTILIDIE said:
Mandi, are you doing all of this yourself?
Click to expand...

Yes, Harmon will be coaching and helping with the crap I can't do because I'm not strong enough:tup:
 
turbodig

turbodig

Active member
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

Just an observation....

Since your plan is to disassemble the whole thing anyway, Mandi, there's a much easier way to get at the stuff in the engine compartment.

Pull the fenders, and the core support/grille.

Then, yank the motor as a whole. It's much easier to get apart once it's outside the engine compartment.

Also, at that point you have less stuff in your way for frame resto.
 
MRS HARMON

MRS HARMON

New member
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

turbodig said:
Just an observation....

Since your plan is to disassemble the whole thing anyway, Mandi, there's a much easier way to get at the stuff in the engine compartment.

Pull the fenders, and the core support/grille.

Then, yank the motor as a whole. It's much easier to get apart once it's outside the engine compartment.

Also, at that point you have less stuff in your way for frame resto.
Click to expand...

I'm sure there is a reason Harmon hasn't told me to do it the easy way :rotf:
 
TYTILIDIE

TYTILIDIE

METH HEAD
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

Wow, my wife won't even help me fix her TY. Just plain BS.
 
MRKING

MRKING

New Parts for Old Trucks
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

I never heard of a simple syclone anything .Stuff happens , bigger better things get put on , where does it end .lol
 
MRS HARMON

MRS HARMON

New member
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

Day #3
Found some interesting things today...... TWO tranny coolers:rotf: and a block that doesn't look stock:roll:

Today I managed to take out ..... valve covers, intake manifold, buncha wires, tranny cooler(s), grill, fuel rails, cowl thingie mabobber guess thats all for now. I actually seemed to get a little bit more done today since I'm getting better at knowing bolt sizes rather than having to go through each one, I also noticed I'm really messy:tup:

Edit:Forgot the distributor and goodies up on the firewall

IMG_1672.jpg

IMG_1671.jpg

IMG_1670.jpg
 
MRS HARMON

MRS HARMON

New member
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

TYTILIDIE said:
Wow, my wife won't even help me fix her TY. Just plain BS.
Click to expand...

But does she clean your house because I don't! Lol seriously domestically challenged here.

MRKING said:
I never heard of a simple syclone anything .Stuff happens , bigger better things get put on , where does it end .lol
Click to expand...

I don't have an incredible urge to be faster than everyone else:rotf:

turbodig said:
Cheap theater?
Click to expand...

:tup:
 
REVEREND HARMON

REVEREND HARMON

Party in a box!
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

Fighting5thSVT said:
Will someone please get this girl a garage to work in!!!
Click to expand...

Ok, heres the deal. The garage already has a sy and ty in it. Mandi was told to hold off on the truck until i get the new garage built { in the next 3 months}. So it was here decision to start tearing it down in the driveway.

DISCLAIMER........I have no way shape or form unscrewed any bolt from this truck. Its all done by her. 1 million questions asked though:rotf:
 
turbodig

turbodig

Active member
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

HARMON said:
Ok, heres the deal. The garage already has a sy and ty in it. Mandi was told to hold off on the truck until i get the new garage built { in the next 3 months}. So it was here decision to start tearing it down in the driveway.

DISCLAIMER........I have no way shape or form unscrewed any bolt from this truck. Its all done by her. 1 million questions asked though:rotf:
Click to expand...

Personally, If I were in FL right now, I'd be working outside too. Indoors for 6 months gets old.
 
MRS HARMON

MRS HARMON

New member
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

HARMON said:
Ok, heres the deal. The garage already has a sy and ty in it. Mandi was told to hold off on the truck until i get the new garage built { in the next 3 months}. So it was here decision to start tearing it down in the driveway.

DISCLAIMER........I have no way shape or form unscrewed any bolt from this truck. Its all done by her. 1 million questions asked though:rotf:
Click to expand...

:blah:
 
J

jpalmer

New member
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

Lol, you guys are funny. see you guys in a couple days. be there late Wednesday. Can't wait to see this thing in person, along with the rest of the stable. Again.
 
powercat6

powercat6

Active member
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

jpalmer said:
Lol, you guys are funny. see you guys in a couple days. be there late Wednesday. Can't wait to see this thing in person, along with the rest of the stable. Again.
Click to expand...

What are you talking about? I'm sure you've seen it. Mark (sy2206) had it at Nats with the trailer.
 
You must log in or register to reply here.
Top